Anyone have a video clip of what OBX Headers sound like with a corsa Cat back???

[Johnny5]

I can PM you my number to send me a cell video or if you can post a good quality video I'd appreciate it. I'm deciding to buy a used set of aftermarket if I can get my hands on one or the OBX new for $500.I want to hear the combo first though before I install it. Hopefully someone at Dempsy's shop will have this combo.

[mgbrv8]

I have flowmasters exhaust with obx headers shoot me a PM and I will text ya a video

[KILLSHOTS]

There's a big difference between this setup with and without cats.

[Johnny5]

I was under the impression that you cannot put Cats on OBX as they have fake glasspacks. Anywoo after hearing that headers is a 10 hr job with 3 men and a lift i may not even divulge as idk if itll be worth thr 20HP

[5ABI VT]

Originally Posted by Johnny5

I was under the impression that you cannot put Cats on OBX as they have fake glasspacks. Anywoo after hearing that headers is a 10 hr job with 3 men and a lift i may not even divulge as idk if itll be worth thr 20HP

I did it myself on jack stands. Looking back, its not hard at all. the hardest part is just locating the little scews and nuts for the shield, spraying penetrant on the bolts/screws and reaching into a few tight spaces and getting the right angles with tools to reach them. The manifolds themselves were really simple. and from below once dropped out you will see tons of space. The longtubes go up very very easily in comparison.

I have a long thread with lots of pictures you can skim through the pics of what I went through ( asked a lot of questions along the way ). Again looking back.. if I had to do it a 2nd time I could do it in my sleep.
http://www.zr1.net/forum/showthread.php?t=20989