Help asap please. Can't get bellhousing off - ZR-1 Net Registry Forums

Racinfan83 · 03-28-2016

Got trans out, removed all bolts from bellhousing, even the cat heat plate one, loosened fork stud, have been trying to pull bellhousing off by working big screwdriver between it and block for a damn hour now. It acts like its hung up on upper driver side somewhere, maybe on a rusty dowel pin I can see the back of. The passenger side is loose, driver side I have about 1/4" gap but it refuses to come any further. Clutch fork is loose on throwout.
Suggestions please before I break something?

Racinfan83 · 03-28-2016

All bolts are removed and ground straps clear...

Racinfan83 · 03-28-2016

I got it. You know I printed up how to do this job from about 4 different places and talked to 2 people on the phone - and not one of em mentioned to take off the plate on the bottom front of the

bellhousing?

Hib Halverson · 03-29-2016

Quote:

Originally Posted by Racinfan83

I got it. You know I printed up how to do this job from about 4 different places and talked to 2 people on the phone - and not one of em mentioned to take off the plate on the bottom front of the

bellhousing?

The lesson in this is: Buy a copy of the Corvette Factory Service Manual. The instructions in it would have told you to remove the flywheel shield.

03-28-2016	#1
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Help asap please. Can't get bellhousing off Got trans out, removed all bolts from bellhousing, even the cat heat plate one, loosened fork stud, have been trying to pull bellhousing off by working big screwdriver between it and block for a damn hour now. It acts like its hung up on upper driver side somewhere, maybe on a rusty dowel pin I can see the back of. The passenger side is loose, driver side I have about 1/4" gap but it refuses to come any further. Clutch fork is loose on throwout. Suggestions please before I break something? __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

03-28-2016	#2
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Help asap please. Can't get bellhousing off All bolts are removed and ground straps clear... __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

03-28-2016	#3
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Help asap please. Can't get bellhousing off I got it. You know I printed up how to do this job from about 4 different places and talked to 2 people on the phone - and not one of em mentioned to take off the plate on the bottom front of the bellhousing? __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]