03-08-2016 | #1 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
'95 ZR-1 takeoff parts to restore modded car back to stock
Now priced individually below in post #4
When I sold my ’95 ZR-1 a few weeks ago I always assumed that the new buyer would want to keep the parts Marc Haibeck had removed to do is 510 HP package and a couple other minor mods. After all, they were removed from a completely stock 21,000 mile California Emissions car so could be used to return the car to a stock appearance for judging or to pass California emissions. I, and I am sure many of us, would want to keep all the original parts with such an original car, but he did not want them, so I am now making them available for sale. The pictures below show the parts, which include stock headers and cats, heat shields, the Secondary throttle vacuum system, A.I.R. system, EGR system, exhaust header bolts and hardware, stock 3.45:1 rear differential, original shifter, cam cover and plenum bolts and 1995 Factory Service Manuals (cost in 2012 $135). There are a few miscellaneous parts as well. My strong preference is to sell the entire group in one lot for $1,000. I have not yet priced the items separately but I believe individually they are worth quite a bit more than that. Pickup in the Chicago area would be best and they all would fit in a trunk or inside a Vette. All are wrapped in strong plastic bags or boxes as appropriate. Possibly could figure a way to ship but that cost would be extra. Possibly a buyer could get someone to haul them from Chicago to BG this spring. Also available separately I have (not pictured) an antenna bypass kit (Corvette Central cost $30) and two new Bosch #13077 O2 sensors (Rock Auto cost $67) in unopened boxes, what appears to be a new set of stock floor mats for a Beige interior (kind of a light brown) and a used set of beige “ZR-1” embroidered Lloyds mats and a storage compartment carpet cover. The storage area cover and passenger side mats are essentially unused and the driver’s side mat shows some wear but also has an added heel pad and grommet. Used them for daily driving to protect original carpet. The Lloyds mats are a bit lighter in color than stock. Here are some pictures with others to follow in next post. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 03-10-2016 at 07:08 PM. |
03-08-2016 | #2 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Some more Pics of the 95 takeoff parts
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
03-09-2016 | #3 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Had a couple inquiries about the mats so I am posting some pics here. And apologies--After taking them out of their bag I discover the set of original mats is slightly used, not new. New logoed Lloyds mats sell for about $120 and the logoed cargo mat for about $104. I added the grommet and heel pad on the driver's mat for about $50 as I recall. My guess on new stock mats is maybe $100. I will sell the originals for $35 and the Lloyds combo for $75 or $100 for the whole group, plus shipping if needed. Here are some pics. While the originals appear dark in the photos, they matched the carpet in my 95 Beige interior.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
03-10-2016 | #4 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Since no one has leaped to purchase the entire group of takeoff parts, and since I have had a number of individual inquiries, I will offer the parts for sale separately. After consulting with Marc Haibeck about how much he might sell the parts for, I have priced them lower where I hope they should sell. If shipping is needed, that will be extra but there probably would be someone traveling through the Chicago area who could get them to BG in May. Will listen to all offers.
1. Exhaust headers and catalytic converters. (Marc’s comment: “Low mileage exhaust manifolds with catalysts are very valuable to someone trying to pass an emissions test. I sell them for $400 each. The heat shields and bolts are part of the manifolds and should go with them.”) So for the right and left manifolds, cats, heat shields and bolts $600 for pickup here or plus shipping. To get a real sense of what a good value this is, go to Jerry's Gaskets website and add up the prices on the individual parts. 2. Secondary throttle parts $125. SOLD 3. A.I.R. system parts $35 Sale Pending 4. 3.45 Rear differential and associated parts $60 Sold 5. Original shifter $30 Sold 6. Cam cover and plenum bolts $25. Sold 7. Factory Service Manuals - 1995 – 2 volumes $100 8. Original floor mats for Beige interior (slightly used) plus used Lloyds mats and cargo mat embroidered with ZR-1 logo. Cargo mat and passenger side mats hardly show any wear; driver’s side shows some wear but has an added heel pad and grommet. $100 SOLD 9. Two Bosch #13077 O2 sensors in unopened box $30 SOLD 10. Corvette Central Antenna bypass kit in unopened box $15 Sold 11. Speedo gears 1 gray 15 tooth 1 green 42 tooth for 3.45 gears $50 SOLD
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" Last edited by WARP TEN; 03-25-2016 at 11:46 AM. |
03-12-2016 | #5 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
I have several sales pending but there are still items left --see post above. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
03-22-2016 | #6 |
Join Date: Aug 2005
Location: Iuka, Mississippi 38852
Posts: 756
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
3.45 rear differential and associated parts sold yet?
|
03-22-2016 | #7 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Hi Richard,
If Bob has sold the 3.45 parts and you are still in need, I have a 3.45 Ring and pinion and some parts..
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
03-22-2016 | #8 |
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,095
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Hi Richard--
Yes mine have been sold and shipped but it looks like Jeff has a set. --Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
03-23-2016 | #9 |
Join Date: Aug 2005
Location: Iuka, Mississippi 38852
Posts: 756
|
Re: '95 ZR-1 takeoff parts to restore modded car back to stock
Thanks Guys. Fortunately i`m not in need of any parts. (yet.)
|
|
|