Single Mass Flywheels

[A26B]

Thanks for your post Jitse!

[A26B]

Originally Posted by -=Jeff=-

So for a stock HP set-up If I needed to swap the dual mass I would do the 22# flywheel with sprung hub disc. That way I have some Dampening

Yes
Flywheel: http://www.jerrysgaskets.com/flywhee...let-90-95-0b1/

Clutch Disc:http://www.jerrysgaskets.com/clutch-...hub-89-95-000/

Pressure Plate: Stock/OEM pull-release

[edram454]

Originally Posted by XfireZ51

That's what I have been using w my Fidanza. It's a Camaro LT-1 sprung hub disc.

I also have a camaro sprung hub clutch with my fidanza and hear no rattle whatsoever with the benefits of a super light flywheel is well worth the money.

ed ramos #3028

[-=Jeff=-]

Originally Posted by XfireZ51

That's what I have been using w my Fidanza. It's a Camaro LT-1 sprung hub disc.

I know.. just confirming the set-up with the 22#