ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 11-07-2015   #1
Johnny5
 
Join Date: Nov 2014
Location: New Jersey
Posts: 363
Default double din install & quality Qjuestion

hi guys, so installed the nav/bluetooth headnit without trimming the bezel as i got the 6.1inch screen. My only question is does anyone else hroave white noise with the radio on. I was told it i bc you have 2 amp (headunit & amp on each speaker) and it causes distortion. ANyone else expeience this? Any solution to fet rid of the static/whitnoise?????


Can you bypass the stock amps to get rid of distortion

Last edited by Johnny5; 11-07-2015 at 07:26 AM.
Johnny5 is offline   Reply With Quote
Old 11-07-2015   #2
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Re: double din install & quality Qjuestion

Is it same pitch tone or alternator whine?
secondchance is offline   Reply With Quote
Old 11-10-2015   #3
Locobob
 
Join Date: Jan 2004
Location: Portland, OR
Posts: 1,057
Default Re: double din install & quality Qjuestion

You need an adapter if you are going to use the stock bose speakers and amps with an aftermarket head unit. I'm using the PAC OEM-1.
__________________
Robert

ZR-1 Net Registry Oregon State Director

91 ZR-1 #431 Black/Black LPE 368
Locobob is offline   Reply With Quote
Old 11-13-2015   #4
Johnny5
 
Join Date: Nov 2014
Location: New Jersey
Posts: 363
Default Re: double din install & quality Qjuestion

thanks loco bob. Did anyone post a how to for a double din install with pics or very detailed? I've been wanting to get this done for some time now after staring at the kenwood box for months
Johnny5 is offline   Reply With Quote
Old 11-20-2015   #5
Johnny5
 
Join Date: Nov 2014
Location: New Jersey
Posts: 363
Default Re: double din install & quality Qjuestion

The only thing i need photos of is what to dremel cut to make sure my double din fits all the way in.
Johnny5 is offline   Reply With Quote
Old 11-21-2015   #6
lisounds
 
lisounds's Avatar
 
Join Date: Jan 2011
Location: Long Island, New York 11542
Posts: 145
Default Re: double din install & quality Qjuestion

every double din radio is "slightly" different
so take yor time, insert radio and trim a little, as needed.
some time you have to cut the back plastic wall behind the radio to achieve the proper depth.
and the front factory bezel has to be filed a bit as well.
take your time its easy
__________________
1995 ZR-1 Red / BLACK
NCRS NATIONAL WINNER DAVE HILL AWARD
TOP FLIGHT & PV AWARDS






Currently in my Stable:

1978 PACE CAR L-82 4SPD "Triple Crown Winner"
1979 TRANS AM Bandit Edition 400 4 spd WS6 Y84 W72
1981 PORSCHE 930 TURBO
1995 ZR1 Red / Black
2004 Z06 Yellow / Black
2010 C6 Grand Sport Convertible Red/Black
lisounds is offline   Reply With Quote
Old 11-21-2015   #7
secondchance
 
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,723
Default Re: double din install & quality Qjuestion

Don't try to cut it. It's impossible to cut straight. Use masking tape to mark how much trimming you need and use a grounding wheel and file to grind it down. 90-91 car bezel don't need much trimming.
secondchance is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020