Spoiler and Diffuser - ZR-1 Net Registry Forums

ZR1North · 10-04-2015

Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4.

Thanks

ZR1North · 10-04-2015

This one caught my attn. too - not sure if I would fit either to my Zee, but they are more subtle than most other units I've seen for C4s.

ZRapid-1 · 10-06-2015

"Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4."

The spoiler and rear diffuser in the picture are renderings and not actual products.

If you're going to put a rear spoiler on your car, this is one of the better looking ones.

The original link is here if you want more info:
http://www.corvetteforum.com/forums/...-opinions.html

ZR1North · 10-07-2015

Noted - thanks. Not sure if the copper Vette photo is a rendering. Many of the comments in the thread you provided capture my thoughts re how bulky and overdone the C4 aftermarket body pieces are. I like the more subtle spoiler approaches like the C6ZR1, M3, etc. which tend to give that little extra that the otherwise beautiful C4 tail lacks. I will continue my search.

ZRapid-1 · 10-09-2015

The spoiler on the copper colored Vette is real.
It's made by a company called CHD Tuning in Italy.
Here's their website:
http://www.chdtuning.com/?page_id=2103&lang=en
Perhaps they could make a wider version for ZR-1s.

ZR1North · 10-10-2015

Appreciate that. I am following up with the Italian supplier.

Thanks

-=Jeff=- · 10-11-2015

American Hydrocarbon in Florida duplicated both of those for 91-up..
(With permission from the European company

USAFPILOT · 10-11-2015

i like the wheels on the blue car!

RussMcB · 10-12-2015

Quote:

Originally Posted by -=Jeff=-

American Hydrocarbon in Florida duplicated both of those for 91-up..
(With permission from the European company

For wider ZR-1's, too?

It looks pretty good on the early Vettes. It would be interesting to see what they look like on a later rounded rear (especially in ZR-1 width).

RICKYRJ1 · 10-12-2015

Check out the spoiler Corvette Forum member (GS977) made for his Grand Sport. Best one I have seen yet. The only change I would make to it is recess the center section of it.

10-04-2015	#1
ZR1North Join Date: Feb 2007 Location: Komoka, Ontario, Canada Posts: 588	Spoiler and Diffuser Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4. Thanks

10-04-2015	#2
ZR1North Join Date: Feb 2007 Location: Komoka, Ontario, Canada Posts: 588	Spoilers and Diffusers - 2 This one caught my attn. too - not sure if I would fit either to my Zee, but they are more subtle than most other units I've seen for C4s.

10-06-2015	#3
ZRapid-1 Join Date: Sep 2010 Location: Bethany, CT Posts: 119	Re: Spoiler and Diffuser "Does anyone have thoughts on where the spoiler and diffuser in the attached might have originated - regular aftermarket or custom piece? I know it would be too narrow for a ZR-1 as it sits on this regular C4." The spoiler and rear diffuser in the picture are renderings and not actual products. If you're going to put a rear spoiler on your car, this is one of the better looking ones. The original link is here if you want more info: http://www.corvetteforum.com/forums/...-opinions.html

10-07-2015	#4
ZR1North Join Date: Feb 2007 Location: Komoka, Ontario, Canada Posts: 588	Re: Spoiler and Diffuser Noted - thanks. Not sure if the copper Vette photo is a rendering. Many of the comments in the thread you provided capture my thoughts re how bulky and overdone the C4 aftermarket body pieces are. I like the more subtle spoiler approaches like the C6ZR1, M3, etc. which tend to give that little extra that the otherwise beautiful C4 tail lacks. I will continue my search.

10-09-2015	#5
ZRapid-1 Join Date: Sep 2010 Location: Bethany, CT Posts: 119	Re: Spoiler and Diffuser The spoiler on the copper colored Vette is real. It's made by a company called CHD Tuning in Italy. Here's their website: http://www.chdtuning.com/?page_id=2103&lang=en Perhaps they could make a wider version for ZR-1s.

10-10-2015	#6
ZR1North Join Date: Feb 2007 Location: Komoka, Ontario, Canada Posts: 588	Re: Spoiler and Diffuser Appreciate that. I am following up with the Italian supplier. Thanks

10-11-2015	#7
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Spoiler and Diffuser American Hydrocarbon in Florida duplicated both of those for 91-up.. (With permission from the European company __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

10-11-2015	#8
USAFPILOT Join Date: Aug 2007 Location: Spring TX Posts: 1,348	Re: Spoiler and Diffuser i like the wheels on the blue car! __________________ 1994 #293 ZR-1 Stainless Works Long Tube Headers, B&B catback w/ X-Pipe, 18" Shelby Series One Wheels, SLP CAI.

10-12-2015	#10
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: Spoiler and Diffuser Check out the spoiler Corvette Forum member (GS977) made for his Grand Sport. Best one I have seen yet. The only change I would make to it is recess the center section of it.