C4 Gathering Roll Call! - Page 3 - ZR-1 Net Registry Forums

NVMYRC51 · 04-28-2015

Ha, ha, my trip starts from Miami in 10 days. Looking forward to a nice cruise to Ky. Hopefully a little cooler than steamy south florida.

Craig,

bradley · 04-28-2015

not sure but hope to go unless the doctors want to operate on me . I sent all winter putting a new motor,clutch, billbs tranny, steering rack , suspension lowered1in, radiator water pump, in her to go just have to get the air conditioning running . a 5000 mile round trip would be fun . is there going to be drag racing this year ????

turbowurm · 04-28-2015

Flying in from Switzerland, staying Wed to Sun. Its my First Gathering, so i'm very excitet!!
2 Years ago i visited the Factory, the Museum and of corse JVD.

See You all there.
Greets, Urs

...and Sorry, there is not enough space in my Bag for the Z.
So no Z only some Rental Crap.

JimZRyd · 04-28-2015

Don't feel bad being Z-less fellas....mines up on jack stands for coilovers install and the Fikse's I ordered want be here for another month so I'll be right there with you. Still will be a blast hanging out with the Brotherhood!

cvette98pacecar · 04-28-2015

At this point I have no clue what I am going to be driving. Heavy work load and death in the Family has left me short on free time.
Might put some miles on the 98PC. It has been ten years since I took her on a lenghty road trip.

Vetman · 04-28-2015

Wife and I driving from Yakima Washington. Four days driving. Maybe I am setting a record in terms of miles. I assume the speakers will be recorded. Especially the record run session. Reeeeaaalllyy looking foreword to meeting members and the whole event! Sunday heading to Marc's shop for some radio work and then the long drive home.

JimZRyd · 04-29-2015

Quote:

Originally Posted by cvette98pacecar

At this point I have no clue what I am going to be driving. Heavy work load and death in the Family has left me short on free time.
Might put some miles on the 98PC. It has been ten years since I took her on a lenghty road trip.

Sorry for your loss Robert. My condolences for you and your family.

Rex Ruby · 04-29-2015

Starting with the MR3 too!

A26B · 04-29-2015

Planning on arriving Thursday, late afternoon. Bringing along some good friends from Stillwater.....

Rick Kirk, RK Machine
Heavily involved in outside machine shop services during engine development and early production, lots of great LT5 history stories.

Greg VanDeventer, Mercruiser
Involved in the LT5 manufacturing program from the beginning and many special LT5 projects along the way. Still doing custom LT5 port work on heads, inj housings and plenum. He's top of the craft.

Chris Allen, Mercruiser
Tapped by Mercury to develop the LT5 production line, Chris was one of the initial Mercury personnel to be involved in the LT5 program.

Rick & Greg have made the 1500 mile round trip with me before. Those trips were the seemingly shortest 11hr trips I've ever made. Talked the whole way and never ran out of topics.

We will be towing the Lingenfelter 415 Aerobody ZR-1.

Looking forward to seeing everyone.

PS: will be bringing some gaskets, seals & a few typical parts, coils, wires, alternator, starter, etc. in case someone needs something while there.

nelson007 · 04-29-2015

I'll be flying down Wednesday, staying to Sunday.

Nelson

04-28-2015	#21
NVMYRC51 Join Date: Sep 2013 Location: Florence, KY Posts: 57	Re: C4 Gathering Roll Call! Ha, ha, my trip starts from Miami in 10 days. Looking forward to a nice cruise to Ky. Hopefully a little cooler than steamy south florida. Craig,

04-28-2015	#22
bradley Join Date: Aug 2013 Location: ridgecrest ca Posts: 103	Re: C4 Gathering Roll Call! not sure but hope to go unless the doctors want to operate on me . I sent all winter putting a new motor,clutch, billbs tranny, steering rack , suspension lowered1in, radiator water pump, in her to go just have to get the air conditioning running . a 5000 mile round trip would be fun . is there going to be drag racing this year ????

04-28-2015	#23
turbowurm Join Date: Sep 2013 Location: Switzerland,Zurich,Buchs Posts: 3	Re: C4 Gathering Roll Call! Flying in from Switzerland, staying Wed to Sun. Its my First Gathering, so i'm very excitet!! 2 Years ago i visited the Factory, the Museum and of corse JVD. See You all there. Greets, Urs ...and Sorry, there is not enough space in my Bag for the Z. So no Z only some Rental Crap. __________________ Current Cars Corvette C4 ZR-1 1990 Corvette C7 Z51 3LT Coupe 2014 E-Force Blower MB E500 4matic Last edited by turbowurm; 04-28-2015 at 06:52 PM.

04-28-2015	#24
JimZRyd Join Date: Jan 2012 Location: Florence, SC Posts: 1,344	Re: C4 Gathering Roll Call! Don't feel bad being Z-less fellas....mines up on jack stands for coilovers install and the Fikse's I ordered want be here for another month so I'll be right there with you. Still will be a blast hanging out with the Brotherhood! __________________ Jim Zorgias 1994 ZR-1 Admiral Blue/Black #245 1996 Callaway Supernatural 450 1990 Callaway Supernatural 490 / CR-1 #7

04-28-2015	#25
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,466	Re: C4 Gathering Roll Call! At this point I have no clue what I am going to be driving. Heavy work load and death in the Family has left me short on free time. Might put some miles on the 98PC. It has been ten years since I took her on a lenghty road trip.

04-28-2015	#26
Vetman Join Date: Feb 2013 Location: Yakima Washington Posts: 404	Re: C4 Gathering Roll Call! Wife and I driving from Yakima Washington. Four days driving. Maybe I am setting a record in terms of miles. I assume the speakers will be recorded. Especially the record run session. Reeeeaaalllyy looking foreword to meeting members and the whole event! Sunday heading to Marc's shop for some radio work and then the long drive home. __________________ Jim 1990 Z # 2441 1959 c-1 230 HP 4 speed frost blue/silver 3 owner 2011 cts-v 556 HP, manual 6 speed 1955 chev 2dr ht PP 265 3 speed w/OD

04-29-2015	#28
Rex Ruby Join Date: Feb 2005 Location: Springfield, PA Posts: 372	Re: C4 Gathering Roll Call! Starting with the MR3 too!

04-29-2015	#29
A26B Join Date: Dec 2003 Location: Arcadia, OK Posts: 3,392	Re: C4 Gathering Roll Call! Planning on arriving Thursday, late afternoon. Bringing along some good friends from Stillwater..... Rick Kirk, RK Machine Heavily involved in outside machine shop services during engine development and early production, lots of great LT5 history stories. Greg VanDeventer, Mercruiser Involved in the LT5 manufacturing program from the beginning and many special LT5 projects along the way. Still doing custom LT5 port work on heads, inj housings and plenum. He's top of the craft. Chris Allen, Mercruiser Tapped by Mercury to develop the LT5 production line, Chris was one of the initial Mercury personnel to be involved in the LT5 program. Rick & Greg have made the 1500 mile round trip with me before. Those trips were the seemingly shortest 11hr trips I've ever made. Talked the whole way and never ran out of topics. We will be towing the Lingenfelter 415 Aerobody ZR-1. Looking forward to seeing everyone. PS: will be bringing some gaskets, seals & a few typical parts, coils, wires, alternator, starter, etc. in case someone needs something while there. __________________ Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 *ZR-1*, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed.

04-29-2015	#30
nelson007 Join Date: Sep 2012 Location: Westminster, Md. Posts: 434	Re: C4 Gathering Roll Call! I'll be flying down Wednesday, staying to Sunday. Nelson __________________ WAZOO MEMBER 1993 #124 Ruby 1994 #??? Red/Black 1995 #061 Black/Red 2012 ZR1 Preproduction