My latest mod!!! - ZR-1 Net Registry Forums

Roadster · 08-31-2014

Still learning about the LT5, so I decided to add this item to avoid the possible collapse of the air duct during high rpm operation, I purchased this part. Although we have specific vendors that carry parts for our vehicles, and I have supported them recently, with that being said, I found this part on the "bay".
Had a good write-up and some of you may have already purchased this or know of it.
Took a good 20 minutes to get it installed, and it feels and looks like it will work very well. No way anything is going to collapse with this installed.

BTW, I never told you guys that I own multiple, yes multiple ZR1's and also another ZR-1 (a 95), only thing is they are attached to the wall......

XfireZ51 · 08-31-2014

I use one of those also. Bitch to install.

Roadster · 08-31-2014

Quote:

Originally Posted by XfireZ51

I use one of those also. Bitch to install.

Yes it was, but got it done......so you used to??? was it on the ZR-1 that you sold?

Racinfan83 · 08-31-2014

Link please??

XfireZ51 · 08-31-2014

Quote:

Originally Posted by Roadster

Yes it was, but got it done......so you used to??? was it on the ZR-1 that you sold?

No. Got it for 458. I'd also made one from aluminum sheet using pop rivets.
Sort of wonder if the thickness of the phenolic reduces amount of airflow vs. The aluminum. On the other hand, the phenolic is smoother with fewer protrusions into the airflow (ie. rivets and seam).

PhillipsLT5 · 08-31-2014

Another option, hoops from Marc

Fully Vetted · 08-31-2014

Geeze... I thought you were saying you got it for your 458. As in Italia 458! Then I realized you were talking of your Black Rose beauty!

Roadster · 08-31-2014

Quote:

Originally Posted by Racinfan83

Link please??

no problem I will send you a PM with the info.......

Roadster · 08-31-2014

Quote:

Originally Posted by XfireZ51

No. Got it for 458. I'd also made one from aluminum sheet using pop rivets.
Sort of wonder if the thickness of the phenolic reduces amount of airflow vs. The aluminum. On the other hand, the phenolic is smoother with fewer protrusions into the airflow (ie. rivets and seam).

Well went for a ride this AM and by the way the 94 performed, I would say that there was not any hinderence of air flow what-so-ever........
Very happy with the mod, glad I did it........

Quote:

Originally Posted by PhillipsLT5

Another option, hoops from Marc

Yes, saw that, but I liked the insert better, you do have to undo the air assembly for easy install of the air duct, but no biggie, and priced the same.
Marc, has great products, his chip is fantastic......

edram454 · 09-01-2014

good mod. I did it months ago. Not to hard to install and my air bridge is solid. this thing will never collapse.

08-31-2014	#1
Roadster Join Date: Mar 2014 Location: Warrington PA Posts: 1,914	My latest mod!!! Still learning about the LT5, so I decided to add this item to avoid the possible collapse of the air duct during high rpm operation, I purchased this part. Although we have specific vendors that carry parts for our vehicles, and I have supported them recently, with that being said, I found this part on the "bay". Had a good write-up and some of you may have already purchased this or know of it. Took a good 20 minutes to get it installed, and it feels and looks like it will work very well. No way anything is going to collapse with this installed. BTW, I never told you guys that I own multiple, yes multiple ZR1's and also another ZR-1 (a 95), only thing is they are attached to the wall...... __________________ Tom 1994 ZR-1 #009 "captured test fleet car" 1974 LS4 454 Vert 1974 L-82 355 Vert. 1982 L83 CFI...now a retired "dd"....Sold WAZOO Member Last edited by Roadster; 08-31-2014 at 12:36 AM.

08-31-2014	#2
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,709	Re: My latest mod!!! I use one of those also. Bitch to install. __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

08-31-2014	#4
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: My latest mod!!! Link please?? __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

08-31-2014	#6
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: My latest mod!!! Another option, hoops from Marc

08-31-2014	#7
Fully Vetted Join Date: Sep 2012 Location: Rockwall, Tx Posts: 1,510	Re: My latest mod!!! Geeze... I thought you were saying you got it for your 458. As in Italia 458! Then I realized you were talking of your Black Rose beauty! __________________ _________________ 1994 AB/Grey #141 430 RWHP/392 RWTQ FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener BBC - Bling By Carter: Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover

09-01-2014	#10
edram454 Join Date: Nov 2013 Location: .. Posts: 693	Re: My latest mod!!! good mod. I did it months ago. Not to hard to install and my air bridge is solid. this thing will never collapse.