What did Sea Foam do for your motor? - Page 3 - ZR-1 Net Registry Forums

Racinfan83 · 08-22-2014

Will adding this stuff to the gas mess up the cats? Never used it - just curious because it sounds like it works as a "fuel stabilizer"? Would be interested in putting some in for the "winter siesta"...

XfireZ51 · 08-22-2014

I just finished spraying Sea Foam into the TB. SF has an applicator that fits under the air bridge allowing you to spray SF into the intake. Simple enough.
Once I sprayed in about 1/2can I shut motor off and let it sit for 15 minutes. Then restarted the motor. Definitely got gray smoke from exhaust as I would rev the motor. Right side seemed to smoke more than the left. I took it out for a romp to clear the rest of the SF from the motor. The overall impression I get is that there is a greater urgency to the throttle. It just feels more itchy and more eager. Its a more sensitive throttle, appearing to be more responsive. The motor seems to have takes a bit more of a BARK at WOT.
Anyone else want to offer their take?

Fully Vetted · 08-22-2014

Where'd you get the applicator? Like an O'Reilly's or AZ?

Karl · 08-22-2014

Quote:

Originally Posted by Fully Vetted

Where'd you get the applicator? Like an O'Reilly's or AZ?

It was on sale at AutoZone 2 for $15.

Schrade · 08-22-2014

Did you do the 25lb bag of sand first?

Quote:

Yup, just add water until it starts overflowing out of the oil cap /fill hole, and then youll be good. Just make sure to do a seafoam [COLOR=blue ! important][COLOR=blue ! important]application[/COLOR][/COLOR] when you get a chance. Thatll get any of the leftover sand out.

From here...
http://www.audiforums.com/forum/off-...e-wrong-80267/

edram454 · 08-22-2014

I will be trying seafoam too. probably a good idea. did your car throw any codes while it was on and you were dumping seaform into the intake?? I am sure mine needs that alot.

Paul Workman · 08-23-2014

Quote:

Originally Posted by Schrade

Did you do the 25lb bag of sand first?

From here...
http://www.audiforums.com/forum/off-...e-wrong-80267/

Oh, man... That can't be for real. But, can you imagine??? LOL!

c4koh · 08-24-2014

I added sea foam to my new (in April) 1992, and it had the effect of cleaning the old injectors... so much so that they started to mis-fire lol! I did an injector resistance test, and the primaries were 7/8 OK, 1 of them about half-gone... and the secondaries were pretty much shot across the board, 1 completely so (hence my mis-fire)...

So, the sea-foam seemed to "clean" and peel back to the metal, which - as they were on original injectors - were likely rotted due to ethanol.

Anyway, I replaced the injectors (thanks Jerry's Gaskets & FIC), and when under the plenum noticed it was a little gunky too. So, once replaced the injectors and verified all was OK, I then went out for a drive - got the engine warm. Got home, removed the accordian bellows, then sprayed sea foam into the intake, around half a container full, with throttle between idle and 4K RPM to suck in some air and keep it warm... then let her sit, engine off, hood down (to keep all the heat in) for an hour...

Started he up, good puff of grey oily smoke, then clear - so certainly some gunk worked off. Car was running well anyway, but certainly it does work to break down deposits, which for the $10 or so it is, is well worth it on my 61K miler.

That and a full container in the gas tank, and I'll do that every year.

XfireZ51 · 08-24-2014

Quote:

Originally Posted by Fully Vetted

Where'd you get the applicator? Like an O'Reilly's or AZ?

Dave,

The applicator came w the spray can.

Ed,

No codes. Most of the smokes comes after you've put in about a 1/2 can and then let a warm motor sit for a bit. It sat for about 30 min. Then started it back up, when I revved the motor
And got gray smoke. Ran it, stabbing the throttle a few times, let it sit and then took it out for a run. Hoping to do some datalogging tomorrow. But as I indicated earlier, the accelerator appears to feel more responsive.

Fully Vetted · 08-24-2014

Quote:

Originally Posted by Schrade

Did you do the 25lb bag of sand first?

From here...
http://www.audiforums.com/forum/off-...e-wrong-80267/

Ok...That is the funniest forum posting I think I've ever read. The replies were hilarious.

08-22-2014	#21
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: What did Sea Foam do for your motor? Will adding this stuff to the gas mess up the cats? Never used it - just curious because it sounds like it works as a "fuel stabilizer"? Would be interested in putting some in for the "winter siesta"... __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

08-22-2014	#22
XfireZ51 Join Date: May 2007 Location: Chicagoland, IL Posts: 9,708	Re: What did Sea Foam do for your motor? I just finished spraying Sea Foam into the TB. SF has an applicator that fits under the air bridge allowing you to spray SF into the intake. Simple enough. Once I sprayed in about 1/2can I shut motor off and let it sit for 15 minutes. Then restarted the motor. Definitely got gray smoke from exhaust as I would rev the motor. Right side seemed to smoke more than the left. I took it out for a romp to clear the rest of the SF from the motor. The overall impression I get is that there is a greater urgency to the throttle. It just feels more itchy and more eager. Its a more sensitive throttle, appearing to be more responsive. The motor seems to have takes a bit more of a BARK at WOT. Anyone else want to offer their take? __________________ [SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX

08-22-2014	#23
Fully Vetted Join Date: Sep 2012 Location: Rockwall, Tx Posts: 1,510	Re: What did Sea Foam do for your motor? Where'd you get the applicator? Like an O'Reilly's or AZ? __________________ _________________ 1994 AB/Grey #141 430 RWHP/392 RWTQ FBI Lyposuction / Secondaries relieved of duty / SW Long Tube Headers / Corsa Exhaust / FIC SS Injectors / MSD Coils / Lightweight Pulleys / Corey tuned B & M Shifter / Aluminum Flywheel / Samco Hoses / Shelby Series One's / C4 No Flex Frame Stiffener BBC - Bling By Carter: Custom ZR-1 Center Caps / Custom Plenum Plate / Air Box Knobs / TB Cover / Oil Filter Cover

08-22-2014	#26
edram454 Join Date: Nov 2013 Location: .. Posts: 693	Re: What did Sea Foam do for your motor? I will be trying seafoam too. probably a good idea. did your car throw any codes while it was on and you were dumping seaform into the intake?? I am sure mine needs that alot.

08-24-2014	#28
c4koh Join Date: Aug 2006 Location: Fishkill, NY Posts: 87	Re: What did Sea Foam do for your motor? I added sea foam to my new (in April) 1992, and it had the effect of cleaning the old injectors... so much so that they started to mis-fire lol! I did an injector resistance test, and the primaries were 7/8 OK, 1 of them about half-gone... and the secondaries were pretty much shot across the board, 1 completely so (hence my mis-fire)... So, the sea-foam seemed to "clean" and peel back to the metal, which - as they were on original injectors - were likely rotted due to ethanol. Anyway, I replaced the injectors (thanks Jerry's Gaskets & FIC), and when under the plenum noticed it was a little gunky too. So, once replaced the injectors and verified all was OK, I then went out for a drive - got the engine warm. Got home, removed the accordian bellows, then sprayed sea foam into the intake, around half a container full, with throttle between idle and 4K RPM to suck in some air and keep it warm... then let her sit, engine off, hood down (to keep all the heat in) for an hour... Started he up, good puff of grey oily smoke, then clear - so certainly some gunk worked off. Car was running well anyway, but certainly it does work to break down deposits, which for the $10 or so it is, is well worth it on my 61K miler. That and a full container in the gas tank, and I'll do that every year.