Front end alignment specs? - ZR-1 Net Registry Forums

Racinfan83 · 05-10-2014

Can someone link me to the proper front end alignment specs for a 1990? Specifically toe and camber... Thanks

Franke · 05-10-2014

Racinfan, according to FSM section 3 page 3A-6 ... the specs are - Caster +6.0 degrees+/- .5 degrees
Camber is +0.5 degrees +/- .5 degrees and individual toe is 0 degrees +/-0.1. This is with full tank of gas and jounced 3 times.

Racinfan83 · 05-11-2014

Cool. Thank You! I was sitting behind the car yesterday at a show and it sure looks like it is "toed out" - which could be part of my vibration issue. It drives fine but I'm gonna have it aligned now..

QMCMSS · 06-15-2015

Is it the same for a 91

PhillipsLT5 · 06-15-2015

http://www.vbandp.com/component/docm...s.html?start=5

Racinfan83 · 06-15-2015

Funny I just came on here to search for this thread...

I appreciate the link - already downloaded and printed it. I haven't had time to take the car to the shop for alignment yet - was actually there for something else the other day and the guy mentioned when was I gonna bring the Vette in.. I told him I had to get the specs first. And waahlaah - here they are! Gotta love this site!

PhillipsLT5 · 06-15-2015

Please note that these specs are symmetrical. For example, when we recommend 1/8" toe in, that indicates 1/16" on each front wheel for a total of 1/8" total toe in.

batchman · 06-17-2015

Please also note the use of positive camber simply has to be at the advice of lawyers. We never tried the ZR-1 at factory alignment settings but our 88 Z51 car was absolutely un-driveable in any performance sense with the factory settings.

My advise - unless you are seeking NCRS only - is to seek out a shop that can vary from "the book" and use pretty much any of the published performance alignment specifications.

Good luck,
- Jeff

Racinfan83 · 06-17-2015

Well this guy can do whatever I tell him to plug into his machine. So he says. I'm not looking to race the car - just a good all around setup for normal driving.. Was thinking about doing the "Advanced Street" settings on that vb&p link above. Will that one be good???

RussMcB · 06-17-2015

I'd be interested to hear opinions about recommended settings (camber and toe) for a street driven (but not daily driven) ZR-1 (with stock suspension) for occasional mountain runs, autocrosses and track days. In other words, a good compromise alignment.

05-10-2014	#1
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Front end alignment specs? Can someone link me to the proper front end alignment specs for a 1990? Specifically toe and camber... Thanks __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

05-10-2014	#2
Franke Join Date: May 2013 Location: Beaver, PA Posts: 516	Re: Front end alignment specs? Racinfan, according to FSM section 3 page 3A-6 ... the specs are - Caster +6.0 degrees+/- .5 degrees Camber is +0.5 degrees +/- .5 degrees and individual toe is 0 degrees +/-0.1. This is with full tank of gas and jounced 3 times.

05-11-2014	#3
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Front end alignment specs? Cool. Thank You! I was sitting behind the car yesterday at a show and it sure looks like it is "toed out" - which could be part of my vibration issue. It drives fine but I'm gonna have it aligned now.. __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

06-15-2015	#4
QMCMSS Join Date: May 2015 Location: Benicia, CA Posts: 28	Re: Front end alignment specs? Is it the same for a 91

06-15-2015	#5
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: Front end alignment specs? http://www.vbandp.com/component/docm...s.html?start=5

06-15-2015	#6
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Front end alignment specs? Funny I just came on here to search for this thread... I appreciate the link - already downloaded and printed it. I haven't had time to take the car to the shop for alignment yet - was actually there for something else the other day and the guy mentioned when was I gonna bring the Vette in.. I told him I had to get the specs first. And waahlaah - here they are! Gotta love this site! __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

06-15-2015	#7
PhillipsLT5 Join Date: Aug 2005 Location: Scottsdale, AZ Posts: 2,452	Re: Front end alignment specs? Please note that these specs are symmetrical. For example, when we recommend 1/8" toe in, that indicates 1/16" on each front wheel for a total of 1/8" total toe in.

06-17-2015	#8
batchman Join Date: Jun 2009 Location: I live at Devens, one run at a time Posts: 455	Re: Front end alignment specs? Please also note the use of positive camber simply has to be at the advice of lawyers. We never tried the ZR-1 at factory alignment settings but our 88 Z51 car was absolutely un-driveable in any performance sense with the factory settings. My advise - unless you are seeking NCRS only - is to seek out a shop that can vary from "the book" and use pretty much any of the published performance alignment specifications. Good luck, - Jeff __________________ [I]91 ZR-1 #1840, autocrossing in SCCA BSP. FIC S/S's DRM chip/Watson/Borla/lid/LW batt&headlights, springs, shocks, pads & lines, quick rack & Turn One, camber brace, 32/22mm sways, A/C halfway deleted 17x11 & 12 CCW's, 315 & 335 Hoosier A6s [/I]

06-17-2015	#9
Racinfan83 Join Date: Apr 2013 Location: Eastern Missouri Posts: 773	Re: Front end alignment specs? Well this guy can do whatever I tell him to plug into his machine. So he says. I'm not looking to race the car - just a good all around setup for normal driving.. Was thinking about doing the "Advanced Street" settings on that vb&p link above. Will that one be good??? __________________ [LEFT][SIGPIC][/SIGPIC][/LEFT] [CENTER][COLOR=Indigo][SIZE=4][I][B] Now Sold 1990 ZR-1 #2093, Black on Black..[/B][/I][/SIZE][/COLOR][/CENTER]

06-17-2015	#10
RussMcB Join Date: Jan 2015 Location: Marietta, GA USA Posts: 1,160	Re: Front end alignment specs? I'd be interested to hear opinions about recommended settings (camber and toe) for a street driven (but not daily driven) ZR-1 (with stock suspension) for occasional mountain runs, autocrosses and track days. In other words, a good compromise alignment.