Code 14 and low coolant level light related?

[LantanaTX]

I have code 14 and the low coolant level Light on. I have checked connections to sensors and they are good. I am assuming I need a low level sensor for the header tank and a temp sensor (to ECM)?

[WVZR-1]

Originally Posted by LantanaTX

I have code 14 and the low coolant level Light on. I have checked connections to sensors and they are good. I am assuming I need a low level sensor for the header tank and a temp sensor (to ECM)?

I know you enjoy acronyms so I'll just do a thread:

http://www.zr1.net/forum/showpost.ph...4&postcount=15

CTS for the ECM is under the plenum. Have you pulled the plenum? Do you have a FSM? 6E-A-36 & 37 and there will be some diagnostic and resistance values in there also.

[gbrtng]

The sensor in the tank is not replaceable - you replace the whole tank assy.
Used to be about $50 at your local dealer.

[LantanaTX]

Originally Posted by gbrtng

The sensor in the tank is not replaceable - you replace the whole tank assy.
Used to be about $50 at your local dealer.

That is what I was thinking until I finally found a coolant level sensor for sale online. It doesn't screw in?

[LantanaTX]

Originally Posted by WVZR-1

I know you enjoy acronyms so I'll just do a thread:

http://www.zr1.net/forum/showpost.ph...4&postcount=15

CTS for the ECM is under the plenum. Have you pulled the plenum? Do you have a FSM? 6E-A-36 & 37 and there will be some diagnostic and resistance values in there also.

Thanks, I have had the plenum off twice, once for injectors the day I bought it in Denver and again two days latter back in Dallas to replace a coil pack. I am getting pretty at it! less than 20 minutes! I will be taking it off again soon to strip and recoat the plenum, injector housing and cam covers. Just received some Carter bling in the mail today for that job! I will check temp sensor when I take things apart. Yes, I have the FSM. It is in not good shape, missing the first few pages and the last few. Makes looking things up very tough!

[WVZR-1]

Originally Posted by LantanaTX

That is what I was thinking until I finally found a coolant level sensor for sale online. It doesn't screw in?

It is serviced with the tank. It's still available from GM and there's new on eBay also but if you've a relationship with a GM dealer I'd think less expensive locally.

GM # 10157994

[Demps]

I have a bunch of stuff you need off a '91.
Ted

[LantanaTX]

Originally Posted by Demps

I have a bunch of stuff you need off a '91.
Ted

Sending PM