wheel refinishing? - Page 8 - ZR-1 Net Registry Forums

BigJohn · 11-21-2013

Quote:

Originally Posted by nelson007

I saw a newer zr1 with black wheels and a red stripe.Is that factory or did some just paint the stripe?
Thanks,
Nelson 007

That would be 2012 ZR1 Centennial Edition!

-=Jeff=- · 11-22-2013

So I got my wheel back today.. Well worth having them done..

They are Powdercoated in color and then Powder Clear

Lifetime warranty from defects etc..

Asked the guy I worked with and the color is a close enough match you will not be able to tell.. I will get some pictures once I get them out of the box and bolted back tot he barrels.

Now for a hood....... and get the rockers done

-=Jeff=- · 11-22-2013

Before:

close up of original color

After:

-=Jeff=- · 12-01-2013

Now to decide what to do about bolts..

I have 40 of the one on the left, 120 of the one on the right

any thoughts?

WVZR-1 · 12-01-2013

Quote:

Originally Posted by -=Jeff=-

Now to decide what to do about bolts..

I have 40 of the one on the left, 120 of the one on the right

any thoughts?

I would think there's a couple reasons why I might choose to do 40 to match the 120. 1. you need fewer 2. it's certainly the type most frequently seen with the larger diameter flange with most multi-piece wheels.

I would think it important to match the shoulder of the bolt also to the 120 also. I'd think the shoulder length is maybe just a couple mm short of the total depth of the bore for the multi-piece when assembled. You didn't mention size or a post a profile so what I mention could be speculation but I wouldn't think. The one on the right looks like it might carry a "trademark". Yes/No?

I would think it not a problem. The catch could be is that I believe some of the multi-piece are done with 7mm hardware. Yours are?

Wheel centers certainly do look good. They did you well.

-=Jeff=- · 12-01-2013

I will get length and info later.. they are 8mm head not sure if actual thread size

Z06scentair · 12-01-2013

They look awesome!

USAZR1 · 12-01-2013

Those turned out really nice,Jeff.

-=Jeff=- · 12-02-2013

bolt on Right says "R O" and "TITAN"

both are M6 as far as I can tell, one is about 28-29mm the other 32mm

Found some chrome plated ones on eBay for $60 per wheel r $220 for all 4. I doubt I can get these parts from Speedline, not sure where else to look

Blue Flame Restorations · 12-02-2013

Jeff, have you considered a stainless fastener? I so often see chrome hardware rusting just from tightening the fastener to the wheel.

Just a thought.....

11-22-2013	#72
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: wheel refinishing? So I got my wheel back today.. Well worth having them done.. They are Powdercoated in color and then Powder Clear Lifetime warranty from defects etc.. Asked the guy I worked with and the color is a close enough match you will not be able to tell.. I will get some pictures once I get them out of the box and bolted back tot he barrels. Now for a hood....... and get the rockers done __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

11-22-2013	#73
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: wheel refinishing? Before: close up of original color After: __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 Last edited by -=Jeff=-; 11-22-2013 at 07:31 PM.

12-01-2013	#74
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: wheel refinishing? Now to decide what to do about bolts.. I have 40 of the one on the left, 120 of the one on the right any thoughts? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

12-01-2013	#76
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: wheel refinishing? I will get length and info later.. they are 8mm head not sure if actual thread size __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

12-01-2013	#77
Z06scentair Join Date: Sep 2013 Location: Charlotte NC Posts: 655	Re: wheel refinishing? They look awesome!

12-01-2013	#78
USAZR1 Join Date: Oct 2013 Location: Wichita Falls,Tx Posts: 604	Re: wheel refinishing? Those turned out really nice,Jeff. __________________ Clint & Sherry 1994 ZR-1 White/Red #152 (sold) 1991 ZR-1 Callaway Aerobody #1332 (sold) 1990 ZR-1 Red/Red #952 (sold) 2002 Z06 Torch Red/Mod Red widebody

12-02-2013	#79
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: wheel refinishing? bolt on Right says "R O" and "TITAN" both are M6 as far as I can tell, one is about 28-29mm the other 32mm Found some chrome plated ones on eBay for $60 per wheel r $220 for all 4. I doubt I can get these parts from Speedline, not sure where else to look __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

12-02-2013	#80
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: wheel refinishing? Jeff, have you considered a stainless fastener? I so often see chrome hardware rusting just from tightening the fastener to the wheel. Just a thought..... __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project