ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 11-03-2013   #1
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Brake Pad suggestions

Looking for a pad a little more aggressive than stox pad, with not too much brake dust, wheels are stox, calipers are stox, just weekend driving and occasional drag, mile or road course racing, maybe a few times a year
PhillipsLT5 is offline   Reply With Quote
Old 11-03-2013   #2
Mystic ZR-1
 
Mystic ZR-1's Avatar
 
Join Date: Jan 2010
Location: Mystic CT
Posts: 2,633
Default Re: Brake Pad suggestions

Hawk HPS pads and a good flush & bleed of the
brake fluid will do the job
Mystic ZR-1 is offline   Reply With Quote
Old 11-03-2013   #3
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Brake Pad suggestions

Hawk HPS is what I use Phil. Very happy with em
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 11-03-2013   #4
RHanselman
 
RHanselman's Avatar
 
Join Date: Jul 2005
Location: Cresson, TX
Posts: 970
Default Re: Brake Pad suggestions

Same...
__________________
Ron Hanselman
Founding Member #80
CM Lifetime Member #1093

1991 #383 Twin Turbo
1993 #099 Ruby, Jeal 368 w/Snake Skinner body
1961 White with Red Int
RHanselman is offline   Reply With Quote
Old 11-03-2013   #5
mike100
 
Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
Default Re: Brake Pad suggestions

Happily running HPS on C5 calipers and rotors, but I will admit that they dust a lot. Still better than ceramics on the front and cracked rotors from too much heat.
mike100 is offline   Reply With Quote
Old 11-03-2013   #6
JThomas
 
JThomas's Avatar
 
Join Date: May 2008
Location: Okemos, MI.
Posts: 1,191
Default Re: Brake Pad suggestions

I used Hawks HPS pads on my '92 and thought they were real good for autocross and "aggressive" street use.

I will switch to them on my '95, when it is time to change.
__________________
Joe Thomas
Corvette Club of Michigan
NCRS-Michigan Chapter Member
NCM Master Ambassador
NCM Lifetime Member
Former NCM Board Member
1991 ZR-1 Melon Copper Metallic/Black
1992 ZR-1 Bright Red/Black (Sold)
1995 ZR-1 Bright Aqua/Gray (Sold)
2012 ZR1 Super Sonic Blue / Dark Titanium
JThomas is offline   Reply With Quote
Old 11-04-2013   #7
Z51JEFF
 
Z51JEFF's Avatar
 
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,079
Default Re: Brake Pad suggestions

Im using Akebono pads,will never use anything else and 90% brake dust gone.As far as performance,they stop the car.
Z51JEFF is offline   Reply With Quote
Old 11-04-2013   #8
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Brake Pad suggestions

I had Akebono pads in my wife's van and they worked well

I have HPS pads on my vette
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 11-05-2013   #9
PhillipsLT5
 
PhillipsLT5's Avatar
 
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
Default Re: Brake Pad suggestions

HPS on the way from summit
PhillipsLT5 is offline   Reply With Quote
Old 11-05-2013   #10
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Brake Pad suggestions

Quote:
Originally Posted by PhillipsLT5 View Post
HPS on the way from summit
John doing the install? I'm replacing rear hub this weekend
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:22 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020