Clutch slave - ZR-1 Net Registry Forums

laboss3 · 05-20-2013

Hi does anyone know who sells a steel clutch slave cylinder replacement. All I can find is the cast model I would rather have the steel one and not the cast one. Or possibly a rebuild kit would do also. It's for a 1990 zr1.

Any help would be appreciated

Bob

LGAFF · 05-20-2013

http://powertorquesystems.com/

scottfab · 05-20-2013

http://www.rockauto.com/catalog/more...272&cc=1041275

and also

http://www.rockauto.com/catalog/more...431&cc=1041275

laboss3 · 05-20-2013

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob

efnfast · 05-20-2013

Quote:

Originally Posted by LGAFF

http://powertorquesystems.com/

2nd'd

scottfab · 05-21-2013

Quote:

Originally Posted by laboss3

Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock.

Bob

Rockauto has both cast and steel. They list about 6 or 8 that fit the 90.
The links I sent are the two steel ones going by the pics. The others were obviously cast going by the pics.
When I replaced mine I used a cast part.

vettn71 · 05-21-2013

Jim at PowerTorque rebuilt my master and slave. Only way to go, as many of the new units may be misassembled. I had the cast units in my Z while I waited to get the originals rebuilt and they just don't feel the same. Call Jim. He's a great guy to work with

Jim

laboss3 · 05-22-2013

Made contact with Jim at power torque systems and am buying one from him. Thanks for all the info and help.

Bob

Schrade · 05-22-2013

If you don't close there, I have all the hardware from my '90 ZF after doin' the auto conversion; 'Doug' has 1st dibbs on the tranny - if you're interested, I can get up with him to see what other parts he might want... (hardware has 32k on it).............

POWERBRAKEBOB · 05-28-2013

I'm pulling mine out to fix the leak. I used to be a Girling Distributor, and had new ones years ago. When I take it apart, I will see if I have the seal kit needed. I have built tens of thousands of power brake units. Many seals will interchange on cylinders. IF I figure out the seal kit, will there be anyone interested in ordering? you can see my videos at youtube.com/powerbrakeservice

05-20-2013	#1
laboss3 Join Date: Oct 2012 Location: prescott az Posts: 26	Clutch slave Hi does anyone know who sells a steel clutch slave cylinder replacement. All I can find is the cast model I would rather have the steel one and not the cast one. Or possibly a rebuild kit would do also. It's for a 1990 zr1. Any help would be appreciated Bob

05-20-2013	#2
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Clutch slave http://powertorquesystems.com/ __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

05-20-2013	#3
scottfab Join Date: Jan 2009 Location: Portland Oregon metro area (Washington side) Posts: 3,207	Re: Clutch slave http://www.rockauto.com/catalog/more...272&cc=1041275 and also http://www.rockauto.com/catalog/more...431&cc=1041275 __________________ Scott Vett owner since 1979._It's about the car and the people

05-20-2013	#4
laboss3 Join Date: Oct 2012 Location: prescott az Posts: 26	Re: Clutch slave Thanks guys I have a call into zf doc if he can't help I will try Powertorque Systems. I tried rock auto but they didn't know what they had cast or steel didn't get a warm feeling. Too bad I have used them in the past but the tech couldn't take a look to see what he had in stock. Bob

05-21-2013	#7
vettn71 Join Date: Oct 2008 Location: Colleyville, TX Posts: 272	Re: Clutch slave Jim at PowerTorque rebuilt my master and slave. Only way to go, as many of the new units may be misassembled. I had the cast units in my Z while I waited to get the originals rebuilt and they just don't feel the same. Call Jim. He's a great guy to work with Jim

05-22-2013	#8
laboss3 Join Date: Oct 2012 Location: prescott az Posts: 26	Re: Clutch slave Made contact with Jim at power torque systems and am buying one from him. Thanks for all the info and help. Bob

05-22-2013	#9
Schrade Join Date: Dec 2012 Location: NC Posts: 1,786	Re: Clutch slave If you don't close there, I have all the hardware from my '90 ZF after doin' the auto conversion; 'Doug' has 1st dibbs on the tranny - if you're interested, I can get up with him to see what other parts he might want... (hardware has 32k on it)............. __________________ I'm getting my snappics / threads removed blindly as fast as I can, to get in compliance with copyright / license TOS on the boards here (lots of FSM pages and other copyright / license violations on my part; sorry guys). And thanks to all the guys who didn't whine when I posted those FSM copyrighted / licensed stuff in my threads... ( :thumbsup: [b]and to think I complied with a mod's request to delete a pic of him in a Challenge Car in NCM Museum, so he wouldn't get in hot water)[/b] Thanks to several guys here for sending parts FREE; BearlyFlying, WeGone, Geezer, GoldCylon, and more there, TonyD, mike100, fletchusmc... 1990 #2794; 4L60e Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless, Power Effects 3" [IMG]https://lh5.googleusercontent.com/-GHpfzty7DVU/UQn-0Ru2xAI/AAAAAAAAA14/08mz1p4QLD4/s445/Screenshot-5.png[/IMG]

05-28-2013	#10
POWERBRAKEBOB Join Date: Apr 2010 Location: HUNTINGTON BEACH, CALIF. Posts: 38	Re: Clutch slave I'm pulling mine out to fix the leak. I used to be a Girling Distributor, and had new ones years ago. When I take it apart, I will see if I have the seal kit needed. I have built tens of thousands of power brake units. Many seals will interchange on cylinders. IF I figure out the seal kit, will there be anyone interested in ordering? you can see my videos at youtube.com/powerbrakeservice