|
04-28-2013
|
#1 |
  
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
DIY Vacuum Line Replacments
Anyone had any luck forming the small vacuum lines found under the plenum?
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
04-28-2013
|
#2 |
|
Join Date: Dec 2012
Location: NC
Posts: 1,783
|
Re: DIY Vacuum Line Replacments
Is your old one toast?
Soaking rubber in Trans-X softens and swells it. I believe that stuff actually integrates into the molecular structure of rubber, because when the rubber dries off, it doesn't draw back up. |
|
|
|
|
04-28-2013
|
#3 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
Re: DIY Vacuum Line Replacments
I'm refering to the formed hard plastic lines you see in this photo from Rob Loszewski Secondary Port Vacuum Diagnosis write up. In my case the small line running from the vacuum connection on the driver's side of the plenum to the check valve before the vacuum reservoir had become brittle and broke in the formed bend right before the plenum connection. I temporary patched it with a short section of rubber vacuum hose but it sure looks ugly now , like a mules asss sewed up with a grape vine. I hate to have to order a $$$$ vacuum line kit for just this one line.
: 
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
04-28-2013
|
#4 |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: DIY Vacuum Line Replacments
Phil I'm not using mine and if I remember I replaced them about a year before my secondaries were removed. What do you think they are worth? Or any interest ?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
04-28-2013
|
#5 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
Re: DIY Vacuum Line Replacments
Thanks for the offer Daryll.
I may get back to you if the DIY route does not work out.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
|
04-28-2013
|
#6 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: DIY Vacuum Line Replacments
Lee found some that can be formed from a local parts store.. But it was some time ago
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
04-28-2013
|
#7 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,120
|
Re: DIY Vacuum Line Replacments
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
04-28-2013
|
#8 |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,156
|
Re: DIY Vacuum Line Replacments
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Shelby Series 1 - Wilwood Brakes Custom Interior NCM Lifetime Member #978 |
|
|
|
|
04-28-2013
|
#9 |
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,180
|
Re: DIY Vacuum Line Replacments
Get a good heat gun get them soft and form them
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-28-2013
|
#10 |
|
Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
Re: DIY Vacuum Line Replacments
Thanks guys, I'll stop by Autozone tomorrow and sneak the wife's hair dryer off to the garage.
__________________
Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake |
|
|
|
 |
|
|
Linear Mode
