|
04-27-2013
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
IH to head; Gasket Failure
Changing the alternator on my 92 I noticed that the oil catch can was milky. looked in the plenum, milky oil.
I checked the oil in the pan, no issues, checked the coolant, no issues When I took IH off the head the gaskets were badly distorted and you could see were OIL and Coolant were mixing
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
04-27-2013
|
#2 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: IH to head; Gasket Failure
There were NOT Jerrys gaskets
They had been on the car since I did the original porting some time ago
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-27-2013
|
#3 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: IH to head; Gasket Failure
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-27-2013
|
#4 |
  
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: IH to head; Gasket Failure
Ouch....that's ugly. Lee, do you know the manufacturer of the gasket. Might help to prevent anyone else from having the same fate.
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
04-27-2013
|
#5 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: IH to head; Gasket Failure
I do know who made them, going to let them know the issue, they do some good stuff generally. Will see if they will switch material; I generally use Jerrys, those tend to be the best.
Stick with Jerrys 
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
04-27-2013
|
#6 |
|
Join Date: Feb 2010
Location: Pendleton, IN
Posts: 3,904
|
Re: IH to head; Gasket Failure
nough said.......
__________________
1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project |
|
|
|
|
04-27-2013
|
#7 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,709
|
Re: IH to head; Gasket Failure
Looks like mine when I uses FO gaskets. I use a Permatex 2 around that area now. No more problems.
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX |
|
|
|
|
04-27-2013
|
#8 |
 
Join Date: Jan 2009
Location: Portland Oregon metro area (Washington side)
Posts: 3,207
|
Re: IH to head; Gasket Failure
Were all the bolts tight?
__________________
Scott  Vett owner since 1979._It's about the car and the people |
|
|
|
|
04-27-2013
|
#9 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,709
|
Re: IH to head; Gasket Failure
Quote:
Update: I meant to write #3 or #4 not 5 primary runners
__________________
[SIGPIC][/SIGPIC]Former Membership Chairman Former ZR-1 Registry - BOD 1972 Corvette 4speed base Coupe SOLD long time ago 1984 Corvette Z-51/4+3 SOLD 1992 Corvette ZR-1 Aqua/Gray #474 SOLD 1992 Corvette ZR-1 Black Rose/Cognac #458 2014 Honda VFR Interceptor DX Last edited by XfireZ51; 04-28-2013 at 12:38 AM. |
|
|
|
|
|
04-27-2013
|
#10 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: IH to head; Gasket Failure
Everything was tight....I had installed these prior to Dominics failure....must have been 3-4 years ago.
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
|
|
Linear Mode
