First few mods of the winter complete - ZR-1 Net Registry Forums

Dmod81 · 02-17-2013

I got my first winter mods completed last weekend. First, I installed the elite engineering catch can. It fit perfectly where the AIR equipment used to be. Even used one of the bolts from the assembly.

I also installed a X940BT. Works great, however, I forgot to install the mic. I told myself I would install it if I ever got a flashing SYS, but that hasn't happened so...
At first I tried to tie into the original speakers and amps, but I was getting a hiss and pop when powering off, so I took out the amps and installed new speakers using the original wiring. Sounds great now.

Finally, I got a SW x-pipe installed in place of a gen 1 B&B resonator, and installed Z06 tips and actuators. Sounds even better now with the new tips when the valves are open, and when closed, I can actually hear myself think.

Next up Is C6 Z06 brakes to go along with my wheels.

secondchance · 02-17-2013

[QUOTE=Dmod81;164134]

At first I tried to tie into the original speakers and amps, but I was getting a hiss and pop when powering off, so I took out the amps and installed new speakers using the original wiring. Sounds great now.
QUOTE]

Too late but FYI - ground loop isolators would have solved popping noise while powering off.

Dmod81 · 02-17-2013

Thanks for the info. I thought there might be a way to fix it, but the new speakers probably sound better anyway.

RICKYRJ1 · 02-17-2013

What wheels are you putting on?

Dmod81 · 02-17-2013

I have some OEM competition gray C6 Z06 wheels on it. Gotta fill them up with bigger brakes.

RICKYRJ1 · 02-17-2013

Quote:

Originally Posted by Dmod81

I have some OEM competition gray C6 Z06 wheels on it. Gotta fill them up with bigger brakes.

Cool, I run polished C6 Z06 on my black car with Z06 brakes front&rear

02-17-2013	#1
Dmod81 Join Date: Mar 2010 Location: Colorado Springs CO Posts: 76	First few mods of the winter complete I got my first winter mods completed last weekend. First, I installed the elite engineering catch can. It fit perfectly where the AIR equipment used to be. Even used one of the bolts from the assembly. I also installed a X940BT. Works great, however, I forgot to install the mic. I told myself I would install it if I ever got a flashing SYS, but that hasn't happened so... At first I tried to tie into the original speakers and amps, but I was getting a hiss and pop when powering off, so I took out the amps and installed new speakers using the original wiring. Sounds great now. Finally, I got a SW x-pipe installed in place of a gen 1 B&B resonator, and installed Z06 tips and actuators. Sounds even better now with the new tips when the valves are open, and when closed, I can actually hear myself think. Next up Is C6 Z06 brakes to go along with my wheels.

02-17-2013	#2
secondchance Join Date: Aug 2006 Location: McLean, VA Posts: 3,723	Re: First few mods of the winter complete [QUOTE=Dmod81;164134] At first I tried to tie into the original speakers and amps, but I was getting a hiss and pop when powering off, so I took out the amps and installed new speakers using the original wiring. Sounds great now. QUOTE] Too late but FYI - ground loop isolators would have solved popping noise while powering off.

02-17-2013	#3
Dmod81 Join Date: Mar 2010 Location: Colorado Springs CO Posts: 76	Re: First few mods of the winter complete Thanks for the info. I thought there might be a way to fix it, but the new speakers probably sound better anyway.

02-17-2013	#4
RICKYRJ1 Join Date: Dec 2005 Location: Tinton Falls, NJ Posts: 1,177	Re: First few mods of the winter complete What wheels are you putting on?

02-17-2013	#5
Dmod81 Join Date: Mar 2010 Location: Colorado Springs CO Posts: 76	Re: First few mods of the winter complete I have some OEM competition gray C6 Z06 wheels on it. Gotta fill them up with bigger brakes.