Ported plenum,injector housings,air horn & 63mm throttle - ZR-1 Net Registry Forums

mrcrowley · 01-25-2005

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483

EES, Inc.

EES, Forums.

weelanddeal · 01-27-2005

Quote:

Originally Posted by mrcrowley

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483

hello, what kind of gains can be made with these mods, on a stock motor, with b&b 3 inch triflow and a chip, thanks
EES, Inc.

EES, Forums.

mrcrowley · 01-28-2005

You should see anywhere from 400-415rwhp with what you just stated.

Z Factor · 01-28-2005

Quote:

Originally Posted by weelanddeal

hello, what kind of gains can be made with these mods, on a stock motor, with b&b 3 inch triflow and a chip, thanks
EES, Inc.

EES, Forums.

[/quote]

With what you have, plus headers and a good tune, you might reach 400rwhp

Z Factor · 01-28-2005

Quote:

Originally Posted by mrcrowley

Topic says it all!

All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it!

985-960-2483

EES, Inc.

EES, Forums.

Hello, and welcome to the forum.

Do you have any pictures, and what if the potential buyer does not have any cores?

blazerdude · 01-29-2005

I have the rest of the motor that this plenum came off of. Is it still available?

Z Factor · 01-29-2005

Quote:

Originally Posted by blazerdude

I have the rest of the motor that this plenum came off of. Is it still available?

Hello, and welcome to the forum.

Your post really has me confused. What exactly do you mean

blazerdude · 01-31-2005

What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available.

Z Factor · 01-31-2005

Quote:

Originally Posted by blazerdude

What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available.

I understand now, thanks.

I would suggest you email/PM the person in question for an answer to your question.

mrcrowley · 02-01-2005

The parts are still available. I thought I had them sold but the guy backed out at the last minute.

Mike

01-25-2005	#1
mrcrowley Join Date: Jan 2005 Location: Slidell, LA Posts: 9	Ported plenum,injector housings,air horn & 63mm throttle Topic says it all! All of the porting was done by ME. Price is 1500.00 for everything with your stock cores, plus shipping. This will add lots of hp for those who want it! 985-960-2483 EES, Inc. EES, Forums.

01-28-2005	#3
mrcrowley Join Date: Jan 2005 Location: Slidell, LA Posts: 9	You should see anywhere from 400-415rwhp with what you just stated. __________________ [url=www.acsvette.com]EES, Inc.[/url] [url=http://eesvette.hyperboards.com/index.cgi] EES, Forums.[/url]

01-29-2005	#6
blazerdude Join Date: Jan 2005 Location: Orangevale, CA Posts: 6	plenum I have the rest of the motor that this plenum came off of. Is it still available?

01-31-2005	#8
blazerdude Join Date: Jan 2005 Location: Orangevale, CA Posts: 6	plenum What I meant to say was, I recently bought the motor that this particular plenum and throttle body came off of. It came from a 90' ZR-1 in Modesto,CA. The guy I bought it from, Dan Zertuchi, sent it to McCrowley for port and polish but, is doing a big block swap in his ZR-1 instead.So I'm guessing that instead of paying his balance owed to McCrowley,he just gave him the plenum. Since I have the motor now, I just wanted to see if the parts are still available.

02-01-2005	#10
mrcrowley Join Date: Jan 2005 Location: Slidell, LA Posts: 9	Re: plenum The parts are still available. I thought I had them sold but the guy backed out at the last minute. Mike __________________ [url=www.acsvette.com]EES, Inc.[/url] [url=http://eesvette.hyperboards.com/index.cgi] EES, Forums.[/url]