|
05-11-2012
|
#1 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Oil Cooler Hose; male connector to housing
Damn these will not come off......anyone have any info on them?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 05-12-2012 at 01:12 AM. |
|
|
|
05-11-2012
|
#2 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Oil Cooler Hose; male connector to housing
These dudes
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
05-11-2012
|
#3 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Oil Cooler Hose; male connector to housing
Lee, mine were on very tight as well. I just used a pipe on the end of my wrench. I don't think it's likely that you'd crack the housing while loosening them (only if overtightening, would that be a risk).
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
|
|
|
|
05-12-2012
|
#4 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Oil Cooler Hose; male connector to housing
Are they reverse threaded?, I actually was lifting the motor with a 3 ft bar.....nothing..anyone know what size these are?????
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
|
05-12-2012
|
#5 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Oil Cooler Hose; male connector to housing
No, not reverse threaded, standard lefty-loosey thread
 . No idea what size the thread is, sorry. It is a tapered thread, but I don't know what size.
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
|
|
|
|
05-12-2012
|
#6 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Oil Cooler Hose; male connector to housing
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
05-12-2012
|
#7 |
|
Join Date: Mar 2009
Location: Orlando, FL
Posts: 1,828
|
Re: Oil Cooler Hose; male connector to housing
well the wrench size is 1 1/8 so the thread must be smaller than that.
__________________
2004 Z06/Z16 LeMans Commemorative Edition 1991 ZR-1 #302 White/Gray (sold) 1991 ZR-1 #1147 Red/Saddle (sold) |
|
|
|
|
05-12-2012
|
#8 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Oil Cooler Hose; male connector to housing
Quote:
All I remember is I bought 4 wrenches for the job 1 inch 1-1/8 and 1-1/4 and 1-1/2. I used three of them all lol
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
05-12-2012
|
#9 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Oil Cooler Hose; male connector to housing
They are a std MNPT, 3/4' I think, but would have to verify in the morning.
Why are you removing them? http://jerrysgaskets.com/store2/root...roducts_id=272
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
05-12-2012
|
#10 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Oil Cooler Hose; male connector to housing
Was going to put them on the new motor, I did not have them on my spare oil housing
Did you get your surprise present Jerry?
__________________
LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 |
|
|
|
 |
|
|
Linear Mode
