Spent the evening plugging the wife's.... - Page 2 - ZR-1 Net Registry Forums

Scrrem · 01-18-2012

OK Shek, you sold me. I think I'm doing this to mine before they go off for refinishing.
Rich

Shrek · 01-19-2012

Quote:

Originally Posted by Scrrem

OK Shek, you sold me. I think I'm doing this to mine before they go off for refinishing.
Rich

Good choice!!

VetteMed · 01-31-2012

Are these 1/8" SS plugs sold at HD/Lowes, typically? Got the plenum off now, and I'd like to finally put an end to messing with the cooling system every time...

Andrew

Scrrem · 01-31-2012

Quote:

Originally Posted by VetteMed

Are these 1/8" SS plugs sold at HD/Lowes, typically? Got the plenum off now, and I'd like to finally put an end to messing with the cooling system every time...

Andrew

I was not able to find this thread on any plugs at local hardware stores here in VA, I endeded up ordering these from Summit Racing.

http://www.summitracing.com/parts/SUM-G1485R/

Rich

VetteMed · 01-31-2012

Thanks for the link, Rich!

Shrek · 01-31-2012

Quote:

Originally Posted by VetteMed

Are these 1/8" SS plugs sold at HD/Lowes, typically? Got the plenum off now, and I'd like to finally put an end to messing with the cooling system every time...

Andrew

Not sure about the big box stores, but they are pretty common online.
We order often from McMaster Carr here at the shop and I just threw my order in with another job.
http://www.mcmaster.com/#stainless-steel-hex-socket-pipe-fitting-plugs/=g1o3x9

Quote:

Originally Posted by Scrrem

I was not able to find this thread on any plugs at local hardware stores here in VA, I endeded up ordering these from Summit Racing.

http://www.summitracing.com/parts/SUM-G1485R/

Rich

Those also look like a great option!

VetteMed · 01-31-2012

OK, great. What is the correct size drill bit and tap to use?

Thanks!!

Shrek · 01-31-2012

Quote:

Originally Posted by VetteMed

OK, great. What is the correct size drill bit and tap to use?

Thanks!!

"Q" (.332) Drill.......1/8-27 NPT Tap

VetteMed · 01-31-2012

Thanks, Shrek!

Andrew

01-18-2012	#11
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,453	Re: Spent the evening plugging the wife's.... OK Shek, you sold me. I think I'm doing this to mine before they go off for refinishing. Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

01-31-2012	#13
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Spent the evening plugging the wife's.... Are these 1/8" SS plugs sold at HD/Lowes, typically? Got the plenum off now, and I'd like to finally put an end to messing with the cooling system every time... Andrew

01-31-2012	#15
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Spent the evening plugging the wife's.... Thanks for the link, Rich!

01-31-2012	#17
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Spent the evening plugging the wife's.... OK, great. What is the correct size drill bit and tap to use? Thanks!!

01-31-2012	#19
VetteMed Join Date: Mar 2009 Location: Orlando, FL Posts: 1,816	Re: Spent the evening plugging the wife's.... Thanks, Shrek! Andrew