Crying Uncle License Bezel Attachment - ZR-1 Net Registry Forums

Blue Flame Restorations · 04-23-2011

Ok, I've put many a car together but I'm a little stumped.

QUESTION???

How does the rear license bezel attach and which end is the top and which is the bottom. One edge has a 90 degree lip and the other does not. Which goes on top?

Laughing at myslef for having to ask for help on such a simple piece.

GOLDCYLON · 04-23-2011

Top is the open edge so the license plate slides in. Or should I say drops in

Blue Flame Restorations · 04-23-2011

Thanks!

What attaches the bezel to the bumper????

Kevin · 04-23-2011

the plate bolts if i remember correctly

Z51JEFF · 04-23-2011

If you look at the bumper picture posted in the Looking For A Plate Holder thread you can see the area where the plate screws screw into the bumper.There are 4 bosses molded in the bumper where the screws thread into the bumper.Now,this is on a production car,I dont know if the bumper you have is a proto part or a production part.In the above picture,see the silver bracket jobbers?The center of these is where the screws go.I have the part number for these screws if anybody needs it,just got to find it.

GOLDCYLON · 04-23-2011

Yep as Jeff has stated there are 4 bosses in the rear bumper where the license plates bolts go through

Blue Flame Restorations · 04-23-2011

OK. Now I know why I couldn't figure it out. The UK license plate that I have does not have mounting holes in it. Looks like I'll have to do some engineering..... Pic attached.

04-23-2011	#1
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Crying Uncle License Bezel Attachment Ok, I've put many a car together but I'm a little stumped. QUESTION??? How does the rear license bezel attach and which end is the top and which is the bottom. One edge has a 90 degree lip and the other does not. Which goes on top? Laughing at myslef for having to ask for help on such a simple piece. __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

04-23-2011	#2
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Crying Uncle License Bezel Attachment Top is the open edge so the license plate slides in. Or should I say drops in __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

04-23-2011	#3
Blue Flame Restorations Join Date: Feb 2010 Location: Pendleton, IN Posts: 3,904	Re: Crying Uncle License Bezel Attachment Thanks! What attaches the bezel to the bumper???? __________________ 1988 KOH Prototype EX5023 sold 1990 ZR-1 #444 Convertible 1990 ZR-1 Black #966 1991 ZR-1 Quazar Blue #296 1957 Duntov SS Project

04-23-2011	#4
Kevin Join Date: Jun 2005 Location: pittsburgh Posts: 4,632	Re: Crying Uncle License Bezel Attachment the plate bolts if i remember correctly __________________ It's not the car, it's the people - Doug Johnson 90 r/r "KEYS ON" nick named "T.L.B"

04-23-2011	#5
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,080	Re: Crying Uncle License Bezel Attachment If you look at the bumper picture posted in the Looking For A Plate Holder thread you can see the area where the plate screws screw into the bumper.There are 4 bosses molded in the bumper where the screws thread into the bumper.Now,this is on a production car,I dont know if the bumper you have is a proto part or a production part.In the above picture,see the silver bracket jobbers?The center of these is where the screws go.I have the part number for these screws if anybody needs it,just got to find it.