![]() |
#1 |
![]() ![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
![]()
Was in Baltimore on business today and made the mistake of stopping by ATI Performance Products on the way home. What great bunch of guys. Told them I was in a hurry an just stopping by to pick up some info on their LT5 torsional damper. After providing a full product briefing they insisted I stick around for an extra 15 minutes while they assembled an LT5 unit for me check out. Anyway to make it short I couldn't leave there with out it after laying eyes on it. A fine piece engineering and machine work as you will ever see. Here are pics of the ATI and stock unit and the massaging I had to do to a couple of the water pump bolt bosses on my 402 stroker build in order to achieve adequate clearance as you can see the ATI is slightly larger in diameter in this area.
ATI Part # 917298 (may be discontinued) ![]() ![]() ![]() Last edited by ZBrink; 4 Weeks Ago at 06:38 PM. Reason: Title Edit |
![]() |
![]() |
![]() |
#2 |
Join Date: Sep 2005
Location: Washington
Posts: 956
|
![]()
1 pound lighter or .5 pound can't remember.. Just under $600 to my door.
Need to thank Todd P. for this, he paid all the up front money for ATI to make it a ready to buy part. |
![]() |
![]() |
![]() |
#3 |
![]() Join Date: Aug 2006
Location: McLean, VA
Posts: 3,718
|
![]()
Looks like you are well on your way to finishing. What is the target date for 402 completion?
|
![]() |
![]() |
![]() |
#4 |
![]() ![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
![]() |
![]() |
![]() |
![]() |
#5 |
Join Date: Dec 2007
Location: Reston, Virginia
Posts: 930
|
![]()
Very nice! Look forward to seeing the built engine
![]() |
![]() |
![]() |
![]() |
#6 |
![]() Join Date: May 2010
Location: Japan
Posts: 3,097
|
![]()
Thanks a lot Phil!!!
![]() All kidding aside, it looks great and I can't wait to hear about your motor. I wish I had the funds and would have built that set up you have; sounds like the perfect all around motor.
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
![]() |
![]() |
![]() |
#7 | |
![]() ![]() Join Date: Apr 2007
Location: Northern VA
Posts: 2,646
|
![]() Quote:
Best advice I can give you is just stay away as far as you can from the west side of Baltimore, MD where ATI is located. I guarantee you will not be able to resist getting one of these otherwise. |
|
![]() |
![]() |
![]() |
#8 | |
![]() Join Date: May 2010
Location: Japan
Posts: 3,097
|
![]() Quote:
I know you are correct and it is a good thing I live so far away from ATI. If I did not have my motor balanced from damper to pressure plate I would probably consider it, but I can't handle any more delays and gotta bolt on those GVD heads today. Thanks for sharing; I'll keep it in mind when I get rich enough to build another "BIG" motor. ![]()
__________________
Craig "ZR-1 NO KA 'OI" "ZR-1 ICHIBAN" 1995 #228 Black/Black with Dunn Heads ZR-1 owner since September 2003 ZR-1 Net Registry Founding Member #0074 NCM Lifetime Member #2048 ![]() |
|
![]() |
![]() |
![]() |
#9 | |
Join Date: Sep 2005
Location: Washington
Posts: 956
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#10 |
![]() Join Date: Aug 2005
Location: Fishers, IN
Posts: 812
|
![]()
Yeah, that price is close to what I paid in just for the design fee
![]() P.S., I had to get the hub ground to size, as it is just too tight for most cranks. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|