|
01-19-2010
|
#11 |
 
Join Date: Jan 2006
Location: Niceville
Posts: 998
|
Re: Coil Over Installation
Hope to get some options tomorrow. I'll post when I do. Ted
|
|
|
|
01-20-2010
|
#12 |
|
Join Date: Jan 2006
Location: Niceville
Posts: 998
|
Re: Coil Over Installation
Well, here's what I've learned so far:
Front: Haven't removed the front spring yet. Ran out of time. Wanted to remove everything that I needed fab work on. There are options for front mods from using all of your equipment, drilling new holes in the frame, and expanding shock tower to relocating the front sway bar & using smaller bushing mounts and heim links. Well, I'm not too big a fan of modifying the frame. Therefore, I thought I'd just have a local shop (in BF Florida) make the mount. Well, turns out it is expensive for such a small run. Welcome to the ZR-1 world you say...yes I agree. So, off to Guildstrand to buy a front block of aluminum with four bolts for $85 list...oh and they won't process the order for some reason after a day of trying. Rear: Spring removed. Bolt removed to shave the head and reverse. Frame not modified. Once again, thought it would be easy to "make" a new shock bracket. (D!mn, had access to a CNC machine at my previous job.) Not so much on the setup cost for making them...for now. I did learn this: the bracket is tempered and pressed. HARD! If a bracket were made, thickness would be critical to the gear seating correctly and must be strong because the rear weight will rest on the mount. The concerning part was the bracket's mounting bolt holes were slightly elongated and the bracket was not precisely flat still. If I reuse them, I will check them after a short while for their ultimate strength and shape. So, I'm at the ZR-1 point. (definition: that point in the modification process at which you are waiting on parts). More later. Ted |
|
|
|
|
01-20-2010
|
#13 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Coil Over Installation
you check with Carter here on the forum for the rear stuff?
he is a machinist
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
01-20-2010
|
#14 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Coil Over Installation
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
01-20-2010
|
#15 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Coil Over Installation
Quote:
http://guldstrand.com/scripts/prodVi...?idproduct=144
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
01-20-2010
|
#16 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Coil Over Installation
Quote:
This is what is needed to reposition the front bar as well correct? Do you know whats needed for the rear Jeff?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
01-20-2010
|
#17 | |
|
Join Date: Jan 2006
Location: Niceville
Posts: 998
|
Re: Coil Over Installation
Quote:
Locobob post on CF: 
Last edited by Demps; 01-20-2010 at 11:51 PM. |
|
|
|
|
|
01-20-2010
|
#18 | |
 
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Coil Over Installation
Quote:
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
|
|
01-21-2010
|
#19 | |
|
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Coil Over Installation
Quote:
the rear you need: flip trailing arm bolts and grind down the head part way move the top of the shock forward 1/2" to do that you either weld and drill and new hole in the plate or 2 holes in the frame. you also need to open the frame to allow room for the FX3 gear assembly to clear the frame too
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
|
01-21-2010
|
#20 |
|
Join Date: Jun 2004
Location: Texas
Posts: 2,431
|
Re: Coil Over Installation
Ted,
Where'd you go? 
__________________
95 ZR-1 BLK/Gry #392 LT5 Reg# 868 *RIP* ZR1NET Founding Mem #155 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
