WTB: 1990 Radio Bezel - ZR-1 Net Registry Forums

Eric870 · 01-11-2010

WTB: a 1990 Radio/power key console. Looking for a New one....

01-12-2010

Unobtanium. I don't think I have seen a new one ever. Just high quality used ones all the way down to garbage.

Trying to fix the led hole that is in yours?

bdw18_123 · 01-12-2010

Yeah, you probably won't ever find a new one of those. And if you do, whoever has it will probably want like $300 for it.

I need one of those too, as mine has the radio hole hacked up. I'd settle for a decent condition used one, but even those are hard to find. You would think that with over 3,000 90's made, they would be a little easier to find.

GOLDCYLON · 01-12-2010

Yeah I was going to chime in here when you said you were looking for a "new" one as well. Keep looking im sure one will turn up. I had the same problem were the previous owner had drilled in three sets of LEDs into the panel for some type of alarm system and cut the crap out of the radio area. It truely is a one year only bezel. Good luck

Eric870 · 01-12-2010

I figure this bezel will cost an arm and leg. Just hope someone has a nice one stashed they are willing to part with....

GOLDCYLON · 01-12-2010

Send a PM to Jim VanDorn

vandornjim is his handle. He may have one tucked away in the attic. Worth a shot. GC

Eric870 · 01-12-2010

"Send a PM to Jim VanDorn"

Thanks i will do that..I have bought some stuff from Jim before...

Question:
Will a non-ZR-1 bezel fit on a ZR-1? There is some on E-bay for $50.

VetteMed · 01-12-2010

Quote:

Originally Posted by Eric870

"Send a PM to Jim VanDorn"

Thanks i will do that..I have bought some stuff from Jim before...

Question:
Will a non-ZR-1 bezel fit on a ZR-1? There is some on E-bay for $50.

It will, but you will need to figure out how to mount the power key assembly. If you've bypassed the power key, then no problem at all

phrogs · 01-15-2010

Quote:

Originally Posted by VetteMed

It will, but you will need to figure out how to mount the power key assembly. If you've bypassed the power key, then no problem at all

Cut a hole in it.

tomtom72 · 01-15-2010

Not to be sticking my two cents where it don't belong,, but if it's just an LED hole you can fill it with plumber's epoxy. You know that stuff the hdw store sells in the tubes.

To make a smooth finish on the out side of the fill just get a stiff piece of cellulose like those clear file folders or a small piece of wax paper will work.
You want to use it as a dam to press the epoxy against. A bit of baby oil will work as a polishing lube to insure a glass smooth surface. The crinkle paint for our interiors that MAD or CC or ZIP sells is a great match...just shake the chit outta the can before shooting. I used it to re-shoot my bezel and it's a very, very close match.....not 100% but 95+%.

Or...I just had a bfo. Go get one of those :gel-coat repair kits. It comes with the acetate film for the smoothing operation and a polyester or epoxy mending filler compound.

Tom

to mask off the lettering I used scotch tape.

01-11-2010	#1
Eric870 Join Date: Apr 2009 Location: Portland OR Posts: 173	WTB: 1990 Radio Bezel WTB: a 1990 Radio/power key console. Looking for a New one....

01-12-2010	#2
Jeffvette Guest Posts: n/a	Re: WTB: 1990 Radio Bezel Unobtanium. I don't think I have seen a new one ever. Just high quality used ones all the way down to garbage. Trying to fix the led hole that is in yours?

01-12-2010	#3
bdw18_123 Join Date: Apr 2009 Location: Prather, CA Posts: 809	Re: WTB: 1990 Radio Bezel Yeah, you probably won't ever find a new one of those. And if you do, whoever has it will probably want like $300 for it. I need one of those too, as mine has the radio hole hacked up. I'd settle for a decent condition used one, but even those are hard to find. You would think that with over 3,000 90's made, they would be a little easier to find. __________________ [IMG]http://i13.photobucket.com/albums/a292/bdw18_123/_zr1netforumsigphoto.jpg[/IMG][B] 1990 Corvette ZR-1 [/B][I] White/Flame Red, #2299, mostly stock, 144K miles.[/I] -Cams timed to the '93-'95 405HP LT5 stock timing. -IAT sensor relocated to below front bumper. -Haibeck hoops installed in airduct. -OBX cat-back exhaust. [COLOR=DarkRed][B](SOLD - December 2012 [/B][/COLOR][COLOR=DarkRed][B]:hello:)[/B][/COLOR] 1993 Corvette Coupe Black/Black, 6-speed (SOLD - October 2009 :hello:)

01-12-2010	#4
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: WTB: 1990 Radio Bezel Yeah I was going to chime in here when you said you were looking for a "new" one as well. Keep looking im sure one will turn up. I had the same problem were the previous owner had drilled in three sets of LEDs into the panel for some type of alarm system and cut the crap out of the radio area. It truely is a one year only bezel. Good luck __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-12-2010	#5
Eric870 Join Date: Apr 2009 Location: Portland OR Posts: 173	Re: WTB: 1990 Radio Bezel I figure this bezel will cost an arm and leg. Just hope someone has a nice one stashed they are willing to part with....

01-12-2010	#6
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: WTB: 1990 Radio Bezel Send a PM to Jim VanDorn vandornjim is his handle. He may have one tucked away in the attic. Worth a shot. GC __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

01-12-2010	#7
Eric870 Join Date: Apr 2009 Location: Portland OR Posts: 173	Re: WTB: 1990 Radio Bezel "Send a PM to Jim VanDorn" Thanks i will do that..I have bought some stuff from Jim before... Question: Will a non-ZR-1 bezel fit on a ZR-1? There is some on E-bay for $50.

01-15-2010	#10
tomtom72 Join Date: Dec 2004 Location: Jacksonville, FL USA Posts: 4,645	Re: WTB: 1990 Radio Bezel Not to be sticking my two cents where it don't belong,, but if it's just an LED hole you can fill it with plumber's epoxy. You know that stuff the hdw store sells in the tubes. To make a smooth finish on the out side of the fill just get a stiff piece of cellulose like those clear file folders or a small piece of wax paper will work. You want to use it as a dam to press the epoxy against. A bit of baby oil will work as a polishing lube to insure a glass smooth surface. The crinkle paint for our interiors that MAD or CC or ZIP sells is a great match...just shake the chit outta the can before shooting. I used it to re-shoot my bezel and it's a very, very close match.....not 100% but 95+%. Or...I just had a bfo. Go get one of those :gel-coat repair kits. It comes with the acetate film for the smoothing operation and a polyester or epoxy mending filler compound. Tom to mask off the lettering I used scotch tape. __________________ 1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member Last edited by tomtom72; 01-15-2010 at 10:39 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode