ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 11-27-2009   #1
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Stud Kit for Cylinder Heads and Main Bearing Caps

I work for a German engine company and can get about any metric fastener that exits, either off the shelve or special made. I would like to look into putting together a stud kit to replace all of the cylinder head and main bearing cap bolts on both two bolt and four bolt blocks. Can someone knowledgeable provide the necessary specs:
  • Fastener size,
  • Stud length
  • Thread pitch
  • Threaded length
  • Strength grade
  • Any other important info
Jagdpanzer is offline   Reply With Quote
Old 11-27-2009   #2
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Ron Woods has the head studs from ARP.

I can get the 2 bolt main measurement's on Monday. I can tell you ARP wants over $178 per stud not including the nut and washer. When I told them to build me 3 sets, never heard from them again.
Polo-1 is offline   Reply With Quote
Old 11-27-2009   #3
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Quote:
Originally Posted by Polo-1 View Post
Ron Woods has the head studs from ARP.

I can get the 2 bolt main measurement's on Monday. I can tell you ARP wants over $178 per stud not including the nut and washer. When I told them to build me 3 sets, never heard from them again.
Any idea what the ARP head studs measure?
Jagdpanzer is offline   Reply With Quote
Old 11-28-2009   #4
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Had a dream last night that I started work on the mother of all LT5 big bore strokers

Last edited by Jagdpanzer; 12-01-2009 at 09:16 PM.
Jagdpanzer is offline   Reply With Quote
Old 11-28-2009   #5
HAWAIIZR-1
Guest
 
Posts: n/a
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Quote:
Originally Posted by Jagdpanzer View Post
Had a dream last night that I started work on a big bore LT5 stroker
I almost fell off my chair........good one.
  Reply With Quote
Old 12-01-2009   #6
Polo-1
 
Join Date: Sep 2005
Location: Washington
Posts: 955
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Here is what I have......
For 2 bolt blocks.



Polo-1 is offline   Reply With Quote
Old 12-01-2009   #7
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,661
Default Re: Stud Kit for Cylinder Heads and Main Bearing Caps

Thanks Kevin, thats what I needed.
Jagdpanzer is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:24 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020