Floor Coating Complete

[Scrrem]

Well, after a four day event (prep, bond coat, final coat, finish coat) I finially got my garage floor coated using the UCoat-It system. Some of my more serious cracks in the slab didn't conceal as completely as I had hoped but with you really have to look close to see them. I'll let you know in a few months how it is holding up.
Rich

[secondchance]

Well Done Rich!
Doesn't the floor look a little bare? Is it not asking for a hydraulic.....

[QB93Z]

Your garage floor looks great Rich.

Very nice ugrade for your man cave.=D> I wish I went with U Coat it too.

[Eric870]

I've been thinking about coating my floor. Let us know how it holds up...

[ZR1Vette]

Rich...
Great to see..know you wanted to do this big time. Now you know what is next... weighs about 2000 lbs and has four legs

Make sure you use the clear plastic sheets under your tires for as long as you can...more cure time better the job.

For the question of durability of the UCoatIt system...

I did the install about 5 years ago and here is condition overview>>


And yes there are a few spots where the finish released....and I will repair that>>

[ZZZZZR1]

Nicely done!

[Scrrem]

Originally Posted by ZR1Vette

Rich...
Great to see..know you wanted to do this big time. Now you know what is next... weighs about 2000 lbs and has four legs

Make sure you use the clear plastic sheets under your tires for as long as you can...more cure time better the job.

For the question of durability of the UCoatIt system...

I did the install about 5 years ago and here is condition overview>>

And yes there are a few spots where the finish released....and I will repair that>>

Thanks Michael, Yeah...Yeah..one thing at a time. Now I need to get a utility shed so I don't have to put back all the crap I removed from the garage to get I looking this empty

Plastic under the tires.....that a good suggestion, I didn't think of doing that. I put the clear coat on a bit thicker that yours, so hopefully it will fair better.
Rich

Originally Posted by ZR1Vette

And yes there are a few spots where the finish released....and I will repair that>>

That is from the heat in the tires. Always try and park the car outside for a bit and let them cool off.

I just helped a neighbor do his three car garage, lot of work, but fairly easy.

[tomtom72]

That looks so sweeet Rich!



I have a bad case of garage envy....