|
09-10-2009
|
#1 |
Join Date: Jan 2009
Location: Albuquerque
Posts: 43
|
Valve springs LT5
I have started to take apart my lt 5 and as I get the heads apart I am finding the the secondary valves in each cylinder valve springs are bent or shorter or otherwise damaged. I am looking for a set of new springs any leads??? Also nee one valve keeper lost one takeing heads apart don't know how but cannot find it. Thanks, Mike
|
|
|
|
09-10-2009
|
#2 |
Join Date: Aug 2005
Location: Scottsdale, AZ
Posts: 2,452
|
Re: Valve springs LT5
Try Marc H
|
|
|
|
|
09-10-2009
|
#3 |
|
Join Date: Oct 2008
Location: tampa
Posts: 538
|
Re: Valve springs LT5
Here is what i would do, since you're not going to find new OEM valve springs in the box, (You may find a used set) buy a brand spanking new set of heads from us. They come with all new valves and springs, as well as the holy grail cam cover emblems, new wear guides and such. $1500.00 per side, after you get done with all the work required to replace the springs with any aftermarket, clean the heads, you'll still end up with used heads and questionable provenance springs.
|
|
|
|
|
09-10-2009
|
#4 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Valve springs LT5
I have a keeper you can have.....
I also have gaskets & seals. link is below my signature
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
09-10-2009
|
#5 |
 
Join Date: Apr 2009
Location: Portland OR
Posts: 173
|
Re: Valve springs LT5
Take a look at LT5parts.com. I don't know anything about them but they have some valve springs on the site. $20.00 each
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
