The Lift has Landed>>> - ZR-1 Net Registry Forums

ZR1Vette · 08-23-2009

First a HUGE

thanks to Phil and Rich... what troopers... besides these lift parts being heavy (had to use an engine hoist to move the ramps and hydraulic jack that slides between the ramps) we also had the wonderful pleasure of good old Virginia humidity

.

Took us a solid 4 1/2 hrs (OK.. you young turks go do it in half of the time...right?) to install, but all works and went as planned.

A few pics of the lift>>

I can get about 5' clearance under the Z at maximum height which has to be done with the garage door closed...could get another couple inches if I move the fluorescent light fixture

I opted for the option hydraulic jack that slides between the ramps...already tried it out on the Z and works great...strongly recommend getting this type of jack.

I also recommend getting aluminum ramps (were optional with my lift) since the steel ones are heavy...Ellen is having mercy on me by getting me the aluminum ones for my birthday next month...

Lastly, if you have ceiling or garage door height limits might want to consider this...I have begun to mark on the column where the hydraulic control unit is locate for the max height for the lift ramps...bottom blue tape is for the Z with the garage door open and the top blue tape is max height with garage door closed. I will pull my C6 onto the lift and go thru the same exercise. (I have heard that a couple of our ZR buddies had forgotten about height issues with their lifts and...well not a good idea).

All is good and thanks to Phil and Rich for sweating it out with me.

rhipsher · 08-23-2009

Very very nice. I'm probably going to go with a two post myself. They seem to be going for about $1,300. But the four post ones are in the 3K to 4K range. I can do $1,300. I love the coated garage floor.

ZZZZZR1 · 08-23-2009

Wow

Looks great Michael! Wish it was last weekend for the install.... Would have loved to have helped.

David

Jagdpanzer · 08-23-2009

Michael,
Glad to of helped out, it was a pleasure to work with Rich and you and thanks to Ellen for fetching us lunch.
Just let me know when you tire of the jack.
You wouldn't want it laying around cluttering up the place.
I could probably find some space to store it on my lift.

flyin ryan · 08-23-2009

Looks great Michael

. You happy with it? Wished you would have said something, or maybe I should have

, about aluminum ramps. Mandatory IMO. When I bought both my lifts, I only needed one set of ramps, so the guy took my two (2) steel sets & swaped me straight accross for one (1) aluminum set. I though that was plenty fair

.

flyin ryan · 08-23-2009

Side note: Went & weighed one (1) ramp, FYI Michael. 16.2LBS., for one (1) aluminum ramp

.

ZR1Vette · 08-23-2009

Oh yea Ryan... steel ramps 53 lbs each as compared to 16-18 lbs for the aluminum ones...guess what is on order

Scrrem · 08-23-2009

Michael,
Was a great learning experence for me and the things I need to consider when installing mine. As alway, I learned a lot from Phil. Got to swing by your buddies garage tomorrw...found the hoist handle in the back of my truck this morning

DOH! Thanks again for lunch!
Rich

phrogs · 08-23-2009

I really wanted to get a lift but I think a 2 post is the best way to go, but I looked at a 4 post and my garage is to low for a 4 post, but its too low for a 2 post as well.

But Im wondering who manufatured yours?

GOLDCYLON · 08-23-2009

Mega nice

08-23-2009	#1
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	The Lift has Landed>>> First a HUGE thanks to Phil and Rich... what troopers... besides these lift parts being heavy (had to use an engine hoist to move the ramps and hydraulic jack that slides between the ramps) we also had the wonderful pleasure of good old Virginia humidity . Took us a solid 4 1/2 hrs (OK.. you young turks go do it in half of the time...right?) to install, but all works and went as planned. A few pics of the lift>> I can get about 5' clearance under the Z at maximum height which has to be done with the garage door closed...could get another couple inches if I move the fluorescent light fixture I opted for the option hydraulic jack that slides between the ramps...already tried it out on the Z and works great...strongly recommend getting this type of jack. I also recommend getting aluminum ramps (were optional with my lift) since the steel ones are heavy...Ellen is having mercy on me by getting me the aluminum ones for my birthday next month... Lastly, if you have ceiling or garage door height limits might want to consider this...I have begun to mark on the column where the hydraulic control unit is locate for the max height for the lift ramps...bottom blue tape is for the Z with the garage door open and the top blue tape is max height with garage door closed. I will pull my C6 onto the lift and go thru the same exercise. (I have heard that a couple of our ZR buddies had forgotten about height issues with their lifts and...well not a good idea). All is good and thanks to Phil and Rich for sweating it out with me. __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE] Last edited by ZR1Vette; 08-23-2009 at 11:07 AM.

08-23-2009	#2
rhipsher Join Date: Aug 2008 Location: Houston 90 Red ZR-1 Posts: 2,320	Re: The Lift has Landed>>> Very very nice. I'm probably going to go with a two post myself. They seem to be going for about $1,300. But the four post ones are in the 3K to 4K range. I can do $1,300. I love the coated garage floor.

08-23-2009	#3
ZZZZZR1 Banned BANNED Join Date: Oct 2006 Location: MD Posts: 3,690	Re: The Lift has Landed>>> Wow Looks great Michael! Wish it was last weekend for the install.... Would have loved to have helped. David

08-23-2009	#4
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: The Lift has Landed>>> Michael, Glad to of helped out, it was a pleasure to work with Rich and you and thanks to Ellen for fetching us lunch. Just let me know when you tire of the jack. You wouldn't want it laying around cluttering up the place. I could probably find some space to store it on my lift.

08-23-2009	#5
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: The Lift has Landed>>> Looks great Michael . You happy with it? Wished you would have said something, or maybe I should have , about aluminum ramps. Mandatory IMO. When I bought both my lifts, I only needed one set of ramps, so the guy took my two (2) steel sets & swaped me straight accross for one (1) aluminum set. I though that was plenty fair . __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

08-23-2009	#6
flyin ryan Join Date: Aug 2006 Location: Edmonton, Alberta or Phoenix, Arizona Posts: 2,741	Re: The Lift has Landed>>> Side note: Went & weighed one (1) ramp, FYI Michael. 16.2LBS., for one (1) aluminum ramp . __________________ There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y.

08-23-2009	#7
ZR1Vette Join Date: Dec 2007 Location: Reston, Virginia Posts: 939	Re: The Lift has Landed>>> Oh yea Ryan... steel ramps 53 lbs each as compared to 16-18 lbs for the aluminum ones...guess what is on order __________________ Michael :cheers: [I][SIZE="2"]1990 RED on RED #566[/SIZE][/I] [I][SIZE="2"]WAZOO MEMBER[/I][/SIZE]

08-23-2009	#8
Scrrem Join Date: Feb 2009 Location: Alexandria, Virginia Posts: 1,467	Re: The Lift has Landed>>> Michael, Was a great learning experence for me and the things I need to consider when installing mine. As alway, I learned a lot from Phil. Got to swing by your buddies garage tomorrw...found the hoist handle in the back of my truck this morning DOH! Thanks again for lunch! Rich __________________ 1990 Bright Red Coupe #608 380 Stroker, Ported Heads/Intake/Housings/TB Haibeck Secondary Delete Chip / Pete's Cams George Braml Intake / FIC Injectors Coated SW Headers / Corsa Bill Boudreau B/B ZF6 / Viper 4.10 gears Ron Davis Radiator Pioneer AVIC-Z140BH NAV Fikse FM5's 285 / 335 / C6 Brakes WAZOO Member

08-23-2009	#9
phrogs Join Date: Jul 2004 Location: Kalamazoo MI Posts: 1,753	Re: The Lift has Landed>>> I really wanted to get a lift but I think a 2 post is the best way to go, but I looked at a 4 post and my garage is to low for a 4 post, but its too low for a 2 post as well. But Im wondering who manufatured yours? __________________ JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything.

08-23-2009	#10
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: The Lift has Landed>>> Mega nice __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode