06-19-2009 | #1 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,725
|
FX3 actuator
Hi, guys,
It is my understanding FX3 is a little different between 90-91 and 92-95. Is the difference at the top of the shock only or actuators as well? Also, are front and rear actuators different also? |
06-19-2009 | #2 |
Join Date: Aug 2006
Location: Texas
Posts: 518
|
Re: FX3 actuator
Actuators are the same. Shocks are different. Yes, front and rear actuators are different lengths.
__________________
1991 ZR-1, Black, Black, # 541 Last edited by Sgreg; 06-19-2009 at 12:39 PM. |
06-19-2009 | #3 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: FX3 actuator
As Greg has stated the actuators are the same from 89-95 for the FX-3 system. The difference was the top gear in the MY 89-91 is the same with 92 being the break point. The actuators work for the entire run.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
06-19-2009 | #4 |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,725
|
Re: FX3 actuator
Thanks.
I went to a shop this morning to replace spring cushions and while at it had both shocks removed and replace top bushings w/ poly pieces. The car was throwing a code for passenger side rear. So, I went prepared with replacement gear for the shock. However, actuator planetary gear was shot also. Luckily, shop owner has a 90 ZR-1 and offered his actuator. That's why I wanted to confirm this topic. Once this is corrected the car will be at 100% mechanically! Thanks. |
06-19-2009 | #5 |
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: FX3 actuator
Awesome glad to here you back into specs. A lot of folks complain about the FX-3 system but a working system does indeed work.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
06-19-2009 | #6 | |
Join Date: Aug 2006
Location: McLean, VA
Posts: 3,725
|
Re: FX3 actuator
Quote:
Driving everyday may have something to do with it. Or, I am just lucky! Also, LTPWS still works fine - knock on wood. |
|
Thread Tools | |
Display Modes | |
|
|