ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 Technical Postings

Reply
 
Thread Tools Display Modes
Old 02-20-2009   #1
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
Unhappy Help 91 Random Tech or Magnaflow cats Part number

Need a little help. I believe that I lost my drivers side cat this week. Sounds like a chock full O nuts around the resonator area. Figures as emissions is due on the 15th frankly the last 30 days of my life have been pure hell so it figures. Does anyone know the correct part numbers for the Magnaflows and the Random tech cats? I beleive the part numbers for the Magnaflows are 94006 for both sides but I am not sure. Im tired of dorking around with used cats so it maybe time to hang the set of JEALs. If anybody knows this off the top of thier heads PLMK and thanks GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 02-20-2009   #2
Sgreg
 
Sgreg's Avatar
 
Join Date: Aug 2006
Location: Texas
Posts: 518
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Gold One, if you do the switch to an AF cat and the Jeals you have been sitting on, I have 4 new stainless steel 3 inch reduction pipes that will make fitting to your exhaust much easier. May save extensive cutting and piecing. I have about $80 in the pieces but will take $40 plus cheap shipping for them. Best money you will ever spend. Makes headers and cats fit like factory.

G.
__________________
1991 ZR-1, Black, Black, # 541
Sgreg is offline   Reply With Quote
Old 02-20-2009   #3
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Quote:
Originally Posted by Sgreg View Post
Gold One, if you do the switch to an AF cat and the Jeals you have been sitting on, I have 4 new stainless steel 3 inch reduction pipes that will make fitting to your exhaust much easier. May save extensive cutting and piecing. I have about $80 in the pieces but will take $40 plus cheap shipping for them. Best money you will ever spend. Makes headers and cats fit like factory.

G.

Awesome Greg is this needed because the Jeals are a three inches on the down pipe side and I beleive my Corsa system is a 2.5? If so sold and thanks Greg as I said its been a tough month!!!! Also update!! The Car failed emissions and the coffecan full of nuts and bolts is getting louder I think the Drivers side cat ran out of it lives.

Does anybody here have a set of aftermarket cats they want to get rid of? Either model best price I have found yet is $65 each for the MFs.
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V

Last edited by GOLDCYLON; 02-21-2009 at 01:06 AM.
GOLDCYLON is offline   Reply With Quote
Old 02-20-2009   #4
Sgreg
 
Sgreg's Avatar
 
Join Date: Aug 2006
Location: Texas
Posts: 518
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Quote:
Originally Posted by GOLDCYLON View Post
Awesome Greg is this needed because the jeals are a three inches on the down pipe side and I beleive my Corsa system is a 2.5? IF so sold and thanks Greg as I said its been a tough month!!!! Aslo update car fail emissions and the coffecans getting louder I think the Drivers side cat ran out of it lives.

Does anybody here have a set of aftermarket cats they want to get rid of? Either model best price I have found yet is $65 each for the MFs.
Pretty much as you said. Stepping down from 3 inches to 2 1/2 inches. Makes life much easier. Also aids in the fit as two of the pipes are designed to clear stuff underneath. PP $50 shipped. PM me if you decide to go this route.
__________________
1991 ZR-1, Black, Black, # 541
Sgreg is offline   Reply With Quote
Old 02-20-2009   #5
jonszr1
 
jonszr1's Avatar
 
Join Date: Sep 2006
Location: lone pine and mammoth lakes
Posts: 1,406
Default Re: Help 91 Random Tech or Magnaflow cats Part number

daryl .,just a word of caution .if that cat has started to break up ,please be carefull as the cat material can work its way back into your motor with very bad results .just didnt want anything bad to happen to your motor . with you having a bad month didnt want to see one more thing go wrong .
jonszr1 is offline   Reply With Quote
Old 02-20-2009   #6
Jeffvette
Guest
 
Posts: n/a
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Just a FYI for anybody searching in the future here are the numbers

MPE-59959 7.75" length
MPE-59929 11" length

3 inch in, 3 inch out metallic substrate
  Reply With Quote
Old 02-20-2009   #7
Jagdpanzer
 
Jagdpanzer's Avatar
 
Join Date: Apr 2007
Location: Northern VA
Posts: 2,662
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Here is an example of 3" Magnaflow MPE-59959 7.75" length cats connected to a 2.5" Corsa system using Stainless Works SS transitions http://www.stainlessworks.net/cart/p...oducts_id=1295

Jagdpanzer is offline   Reply With Quote
Old 02-20-2009   #8
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,147
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Thanks for that illustration. Thats what I was thinking it would look like. Ok update im going with the Jeals and I was able to pickup a set of Magnaflow cats 59959s for $137.36 Shipped. Let see if I get a performance pick up on this after this is done as well.... and pass emissions. Thanks for all the help. GC
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)

GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 02-20-2009   #9
FU
 
FU's Avatar
 
Join Date: Mar 2004
Location: Found Member
Posts: 4,341
Default Re: Help 91 Random Tech or Magnaflow cats Part number

I like those transitions
__________________
Frank Urbo.

NCM Lifetime member # 982
Registry Founding # 237
FU is offline   Reply With Quote
Old 02-20-2009   #10
Gunny
 
Gunny's Avatar
 
Join Date: May 2005
Location: Georgia Mountains
Posts: 927
Default Re: Help 91 Random Tech or Magnaflow cats Part number

Quote:
Originally Posted by Sgreg View Post
Gold One, if you do the switch to an AF cat and the Jeals you have been sitting on, I have 4 new stainless steel 3 inch reduction pipes that will make fitting to your exhaust much easier. May save extensive cutting and piecing. I have about $80 in the pieces but will take $40 plus cheap shipping for them. Best money you will ever spend. Makes headers and cats fit like factory.

G.
Are all 4 reduction pipes spoken for? I am looking for the best solution (i.e. fewest headaches) to hook up 2.5" Corsas to 3" headers/cats.

George
Gunny is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2025