|
10-19-2008
|
#1 |
Join Date: Aug 2008
Location: New Jersey
Posts: 44
|
no back up lights?
I just purchased a 95 and the back up lights don't work, the bulbs and fuse are good, the switch at the transmission has been replaced but still no BU lights. The formal owner had a B&M shifter installed, any ideas on what could cause this or what to do next?
thanks 
__________________
95- #338 |
|
|
|
10-20-2008
|
#2 |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: no back up lights?
Hmm you sure the switch is good?
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V Last edited by GOLDCYLON; 10-20-2008 at 12:09 AM. |
|
|
|
|
10-20-2008
|
#3 | |
 
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: no back up lights?
Quote:
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
|
10-20-2008
|
#4 |
Join Date: Jul 2006
Location: Tennessee
Posts: 116
|
Re: no back up lights?
How hard are the switches to replace?
|
|
|
|
|
10-20-2008
|
#5 |
|
Join Date: Sep 2008
Location: Vancouver
Posts: 224
|
Re: no back up lights?
sounds like there is an "open" in the circuit. that could be a break in the wire somewhere or it could be a bad switch. if you have a multimeter and know how to use it, that would be the best place to start.
Chris
__________________
[SIZE=1]1993 Corvette ZR-1 #137, 1990 Yellow 6speed coupe, and 1991 6speed coupe.[/SIZE] |
|
|
|
|
10-20-2008
|
#6 |
 
Join Date: Dec 2003
Location: Chicagoland,IL
Posts: 2,679
|
Re: no back up lights?
Did you make sure the little slug was still in the hole when you replaced the reverse switch.
Pete
__________________
'91 #1635 PoloGreen 350 LT5 11.09 @ 129.27 11.04 @ 128.86 474RWHP 400RWTQ http://www.youtube.com/watch?v=SFNFOhGGlR4 http://www.youtube.com/watch?v=ZlRIOMwaDYY https://sites.google.com/site/peteszr1garage |
|
|
|
|
10-20-2008
|
#7 | |
|
Guest
Posts: n/a
|
Re: no back up lights?
Quote:
|
|
|
|
|
10-20-2008
|
#8 | |
|
Join Date: Aug 2006
Location: Edmonton, Alberta or Phoenix, Arizona
Posts: 2,741
|
Re: no back up lights?
Quote:
__________________
There are no limit's mans ingenuity, just as mans ingenuity will never conquer the forces & behavior of this planet...Smokey Y. |
|
|
|
|
|
10-22-2008
|
#9 |
|
Join Date: Aug 2008
Location: New Jersey
Posts: 44
|
Re: no back up lights?
what is the little slug? and where would i get one? i did not change the switch so I don't know if it was replaced.
__________________
95- #338 |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
