Zzzzz Bad Bitch is back...NitrousJunkies Zr1 is alive with pics!!!

[Jagdpanzer]

What ever became of Mr. NitrousJunkie?
Haven't seen a post from him in a long time.

[Zr1 Destroyer]

Originally Posted by Jagdpanzer

What ever became of Mr. NitrousJunkie?
Haven't seen a post from him in a long time.

He's still around.....he hangs out in the c6z06 section on cf. He's is doing performance work only now and has been slammed with cars at his shop that he has just sold to upgrade to a larger 10000 square foot facility.

[jonszr1]

Originally Posted by HIZNHRZ

What is the 3M stuff called? The only thing I've seen is a polish call 3M Finesse-it, Ultra Fine. Is that what you are talking about?

it the 3m 3000 ultra fina go to the 3m link that was posted in this thread . what i liked was this tuff almost got oily while working it . you can work this stuff for a long time unlike some stuff that seems to dry instantly. this stuff for me anyway works so well and easy then i use liquid glass or mothers syn wax to finish it off. there really are alot of fine products out there just thought to share what cured my problems with seeing those ever present ugly swirl marks .

Originally Posted by Zr1 Destroye

but the auto did add some pounds to her!

As we know the Auto trans. is lighter than ZF6 ! correct me?

[Aurora40]

Originally Posted by HADI-ZR1

As we know the Auto trans. is lighter than ZF6 ! correct me?

Probably not that big-*** 4L80 he put in there.

[Pete]

Originally Posted by HADI-ZR1

As we know the Auto trans. is lighter than ZF6 ! correct me?

If you consider the stock 39lb flywheel, plus the clutch pressure plate, from ZF's bellhousing to tail housing i would say they would be very close.

Auto trans has more fluid 10-12 qrts, ZF 2.5 qrts.

Pete

Originally Posted by Pete

If you consider the stock 39lb flywheel, plus the clutch pressure plate, from ZF's bellhousing to tail housing i would say they would be very close.

Auto trans has more fluid 10-12 qrts, ZF 2.5 qrts.

Pete

Pete,
The 4L80 has 260 lbs weight Filled !

The Zf6 has 230 lbs only the unit, by adding your flywheel 39lb and say 10-15 lbs Clutch,
then you have 280-285 lbs for ZF6

[Zr1 Destroyer]

The flywheel and converter are kinda heavy in that 4l80.....the auto flywheel is a thicker aluminum deal so it's prolly a little heavier then the zf and the auto takes more power to run, but with a 1.4 sixty time I'd say it's a nice mod!

[FU]

Originally Posted by Zr1 Destroyer

Yes...4l80...good for 1.4 sixty foot on Hoosier quik time pro's and factory IRS.

OK guys, i just called them to make sure how much our trans. weight!
I called the ZF trans. dealership and they gave me the exact weight for ZF S6-40 which is : 170 lbs DRY !
the 230 lbs is for ZF S6-650 model.

So Pete you are right about the weight is about same as 4l80.