|
09-10-2005
|
#21 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
There is broken intake cam on my engine..
Could someone help, please..  (Haibeck sells 4 cams set 4000USD) |
|
|
|
09-10-2005
|
#22 | |
 Join Date: Sep 2005
Posts: 45
|
Quote:
http://www.lt5-parts.com/library/cat...5%2C%7CTop+End If either of those deals fall through, I have a set of stock cams sitting on the shelf with only 30k miles on them as well. Last edited by wdo-mkr; 09-10-2005 at 09:32 AM. |
|
|
|
|
|
09-10-2005
|
#23 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Thanks
 Yes. Cliff did send me cam. It leaves from UK to Finland at monday. Lingenfelter also had cams. |
|
|
|
|
09-24-2005
|
#24 |
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
So did you ever get an answer as to what the probable cause to this mess was? How are things coming along?
|
|
|
|
|
09-26-2005
|
#25 |
|
Join Date: Aug 2005
Posts: 54
|
wont run
hey mika
i no u said you swapped the coil positions but the gm # is the same for all 4 ib be willing to bet that you have a bad coil why not replace the one thats bad??? i would think if it were bad at 2,7 then you swapped it at another position it would do the same there???.2 years ag at carlise i had a canadien zr1 and his owner come done to fix a problem he had many issues bad tensioner,2ndary vac pump leak and it would run but you could feelit running on 6cylinders after gordon recheck the problem it was a bad coil,his was missing and not firing after we put the coil in took it for a blast up i81 the kid was all excited and thrilled. I still think you have an electrical issue ,if you replace the coil while you are there although expensive replace the coil module. 
|
|
|
|
|
10-13-2005
|
#26 |
|
Join Date: Dec 2003
Location: S. Florida
Posts: 2,667
|
Re: LT5 wont run with all cylinders
Any updates?
|
|
|
|
|
11-19-2005
|
#27 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: LT5 wont run with all cylinders
Car is running now. Thanks to Haibeck of all help
|
|
|
|
|
11-19-2005
|
#28 | |
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
|
Re: LT5 wont run with all cylinders
Quote:
__________________
Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img] |
|
|
|
|
|
11-19-2005
|
#29 |
|
Join Date: Aug 2005
Location: San Fernando Valley, CA.
Posts: 896
|
Re: LT5 wont run with all cylinders
fwiw, www.nelsonracingengine.com can get cams made to any lobe and hardness. I belive they are $2500/4. May want to contact him for specific info.
__________________
1990 ZR1, 142,000 miles-Black on black 4.09's Haibeck chip, 3"exh, K&N, meth inj. |
|
|
|
|
11-21-2005
|
#30 |
|
Join Date: May 2004
Location: Finland
Posts: 123
|
Re: LT5 wont run with all cylinders
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
