|
04-07-2008
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Coolant Tube cracking
OK. Here's one of the coolant tbe with a fracture at the bolt boss. Fracture is thru material. Can I weld it back up?
 
|
|
|
|
04-07-2008
|
#2 |
|
Guest
Posts: n/a
|
Re: Coolant Tube cracking
Yea, you can weld it up and then grind it smooth again. Should not be to difficult.
|
|
|
|
04-07-2008
|
#3 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Coolant Tube cracking
Jeff,
What causes that? Was bolt just overtorqued? BTW, ordered bolts from McMaster. |
|
|
|
|
04-07-2008
|
#4 |
 
Join Date: Dec 2003
Location: Arcadia,OK
Posts: 3,394
|
Re: Coolant Tube cracking
After welding, you need to make sure its not warped on the mating gasket surface.
__________________
Jerry Downey JERRYS LT5 GASKETS & PARTS http://www.jerrysgaskets.com 1994 ZR-1, Black/Black, Lingenfelter Aerobody, 416cu in, 3.91 gears, coil-over susp, Brembo brakes, etc. 2016 Black-Red, 3LT-Z51 Auto 8-speed. |
|
|
|
|
04-07-2008
|
#5 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Coolant Tube cracking
Quote:
|
|
|
|
|
|
04-08-2008
|
#6 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Coolant Tube cracking
Quote:
Man Dom somebody really overtourqued that coolant pipe IMHO
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
04-08-2008
|
#7 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Coolant Tube cracking
Quote:
|
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
