|
03-24-2008
|
#1 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Secondary Port Throttle Parts
Posted this on the "other" site.
I took apart secondary port throttle assembly as part of preparing to do port matching on DIY Top End project. When I removed lever mechanism on passenger side, I had 4 "tab washers" which position the lever with the throttle plate shaft. However, when I removed the driver's side, none of the levers had any tab washers with them. So the possibility exists that although the secondaries may have opened, each cylinder may have opened just a little bit differently than the other. Or everything worked just fine. Anyone have any of these tab washers available? You can email or pm me and let me know.
Are they necessary? |
|
|
|
03-24-2008
|
#2 |
 Join Date: Sep 2005
Location: Washington
Posts: 955
|
Re: Secondary Port Throttle Parts
Kurt has them.
$24.83 each  http://www.whiteracingproducts.com/i...ex&cPath=10_72 If you cant find any, I think I have some. |
|
|
|
|
03-25-2008
|
#3 |
 
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Secondary Port Throttle Parts
$24.83 each
Damn....My A** hurts just readin that. LGAFF 92 ZR1 #234 |
|
|
|
|
03-25-2008
|
#4 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Secondary Port Throttle Parts
How many can you possibly sell? He keeps trying to hit a home run and causes people to look somewhere else instead of becoming a source.
Oh well. Just some free marketing advice. |
|
|
|
|
03-25-2008
|
#5 | |
  
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Secondary Port Throttle Parts
Quote:
 Your azz will hurt a little more. 
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
03-25-2008
|
#6 |
|
Join Date: Mar 2007
Location: Crystal Lake, IL
Posts: 7,194
|
Re: Secondary Port Throttle Parts
You know there's probably some guy in Stillwater, OK named Bubba that has all of these parts in his garage or a rusted out storage shed in the back yard, next to an assortment of old lawnmowers, lawn jarts, and a croquet set.
LGAFF 92 ZR1 #234 |
|
|
|
|
03-25-2008
|
#7 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Secondary Port Throttle Parts
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
03-25-2008
|
#8 | |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Secondary Port Throttle Parts
Quote:
|
|
|
|
|
|
03-26-2008
|
#9 |
|
Join Date: Oct 2007
Location: lone pine and mammoth lakes ca.
Posts: 544
|
Re: Secondary Port Throttle Parts
thankfully there is more than one way to skin an englishman i mean cat
 no offence intended jus tcouldnt helpmyself
|
|
|
|
|
03-28-2008
|
#10 |
|
Join Date: May 2007
Location: Chicagoland, IL
Posts: 9,708
|
Re: Secondary Port Throttle Parts
Just wanted to thank everyone for reaching out to help on getting these parts. Brad Taylor sent me his secondary assembly so I'll be able to move ahead on getting this thing put back together. Thanks also to Polo-1.
Let me know if I can return the favor. 
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
