04-07-2022 | #21 | |
Join Date: Oct 2017
Location: TX
Posts: 2,047
|
Re: 1990 ZR-1 #2456 Original Components
Quote:
I've got my build sheet. Will check and see what it says
__________________
Kenny 1990 #442 |
|
04-07-2022 | #22 |
Join Date: Oct 2017
Location: TX
Posts: 2,047
|
Re: 1990 ZR-1 #2456 Original Components
The VIN stamping should be on the drivers side front of the glass top frame.
__________________
Kenny 1990 #442 |
04-07-2022 | #23 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
|
04-07-2022 | #24 |
Join Date: Dec 2019
Location: st louis mo
Posts: 749
|
Re: 1990 ZR-1 #2456 Original Components
Wow never new that one,👍
__________________
95 admiral blue z(sold)/ / 93 ruby z(sold) 91 steel blue z/95 aqua z haibeck 510, 91 callaway 415 areobody #5 |
04-07-2022 | #25 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
|
04-08-2022 | #26 |
Join Date: Oct 2017
Location: TX
Posts: 2,047
|
Re: 1990 ZR-1 #2456 Original Components
Marty,
The build sheet may have been the clue!! As previously posted, my car is '90 #0442. The masking tape on the front of the glass top has 987 written on it and the glass top is properly stamped with the car's VIN. On the build sheet in space #10, top left corner has : SCHED.NO.DATE 014987. Notice the last 3 numbers match the masking tape. On the build sheet in space #24, top right corner has: DP.SEQ.NO. 05829(space)014987 From this info I would surmise that the tape was marked to correspond with sequence number, not the vehicles VIN. Mark, have not had a chance to get my glass top out, but will soon and document the info at rear center of the top.
__________________
Kenny 1990 #442 |
04-08-2022 | #27 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
|
04-08-2022 | #28 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
|
04-08-2022 | #29 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
Removed the intake for cleaning and discovered this handwritten # on the fiberglass shroud.
I installed a reproduction A.I.R. foam filter in its rightful place. The original was long gone...not even a remnant. Last edited by AirbusDriver; 04-08-2022 at 05:32 PM. |
04-09-2022 | #30 |
Join Date: Jul 2016
Location: Harrodsburg, KY
Posts: 448
|
Re: 1990 ZR-1 #2456 Original Components
|
Thread Tools | |
Display Modes | |
|
|