1990 valet key Vs 1991

[-=Jeff=-]

Originally Posted by 32valvesftw

Can you epoxy the 90 key/switch assembly into the 91 Bezel?

I would drill out the hole for the 90 key and mount it, you would need something to cover the hole for the LED

[max76]

Originally Posted by -=Jeff=-

I would drill out the hole for the 90 key and mount it, you would need something to cover the hole for the LED

The 1990 key switch is bigger than 1991?
In the next days I'll receive the 1991 radio bezel and the shifter consolle...I'll like to use the 91 key but when I will have the pieces in hand I'll see what to do...

[-=Jeff=-]

Looking at a picture of the 91 bezel you will need to drill or notch the ears for the 1990 key cylinder

[max76]

Originally Posted by -=Jeff=-

Looking at a picture of the 91 bezel you will need to drill or notch the ears for the 1990 key cylinder

Thanks for the suggestion...when i'll have the parts in hand i'll decide what to do for fit my key in 91 hole...or...maybe i'll try to use the 91 key in 90 car... ;-)

[aafc]

Back in 2004 when i installed the auto transmission, I did not want to cut the
org radio bezel. So i got a radio bezel used from a non ZR-1 (1990).Drilled
hole and mounted the power switch. Then had decals made to show the
power settings on the radio bezel.
John


Attachment 15301

[max76]

Originally Posted by aafc

Back in 2004 when i installed the auto transmission, I did not want to cut the
org radio bezel. So i got a radio bezel used from a non ZR-1 (1990).Drilled
hole and mounted the power switch. Then had decals made to show the
power settings on the radio bezel.
John


Attachment 15301

Yes...this was another possibilities...but, as you say, if you take the non zr1 radio bezel lose the yellow letters...can you show me the pic of your decal? Here decal shop tell me that the letters are to much little and there are difficult to cut...

[aafc]

See if this works


https://www.zr1.net/forum/picture.ph...pictureid=4572

[max76]

Originally Posted by aafc

See if this works


https://www.zr1.net/forum/picture.ph...pictureid=4572

Yes...it's work...nice decal...

Do you know if there is a color code for the gray of the 90/91 radio bezel/shifter console?

[aafc]

I do not the code for the radio bezel of the 90/91. It might be the same for all
C4's in that year. Check in the NCRS section and ask them.
John

[-=Jeff=-]

The font is the other part of that.. if I knew the font I would do the same for my bezels