Ever wonder if a 30 year old spare works? - Page 2 - ZR-1 Net Registry Forums

rush91 · 06-17-2020

Quote:

Originally Posted by ZWILD1

I have really had good luck and never used the spare in any of my Corvettes. This includes trips to Bowling Green with the cars. My 96 was a daily driver for at least 3 years. I removed my spare and cleaned it up with car wash preserving the markings and installed it back just the way it was. I took detailed picks of it when I removed it so I could reinstall the jack just the way it was placed at the factory. The Michelin PS'2 I purchased from Tire Rack actually come with a road hazard policy. The T155/70D17 is still available as it is used on new Toyotas and Lincolns.

I worked for an independent tire dealer from late 82 until 1990. I saw some crazy stuff pulled from tires drivers ran over. Things like 2x4's, large portions of lawn mower blades, large bolts that went in head first, sections of glass bottles, and just about anything you can think of. I prefer to patch a tire when it's in the center section of the tread. We used a cone shaped plug installed with a gun. Although I have seen the plugs cut by the tires steal belts over time. Also with a puncture that breaks the tires steal belts a separation may develop. When you strike a curb with the side wall a bubble or bulge may develop. This is caused by the inside layer of the tire breaking. We call that an impact abrasion which voids the warranty as does any puncture. I highly recommend getting a road hazard policy especially for tires that cost a couple hundred dollars.

I've never had a flat tire in 30 years of driving, until I got my ZR-1....Since owning it, I have picked up more bolts, screws, and metal strips than one would imagine. And I had no idea that is where the jack bag went, mine was in one of the storage bins.

carman49 · 06-28-2020

After I bought my 90 last fall, I checked everything out, like where the spare is and how to get at it. I found that the 30 year old spare had probably never been lowered and had "0" psi in it. I aired it up and it held air, so I put it back in place, hoping never to have to use it. I have to replace the Nitto tires that are now on it (10 years old) and it's good to know that I can also buy a new spare and replace it too.

lfalzarano · 06-29-2020

Don?t forget to change out the valve on the spare.

Sent from my iPhone using ZR-1 Net Registry

GOLDCYLON · 07-03-2020

I recently replaced mine On my 91 but they are special order only from Discount Tire mine was rotted

06-28-2020	#12
carman49 Join Date: Nov 2019 Location: Prosper Texas Posts: 16	Re: Ever wonder if a 30 year old spare works? After I bought my 90 last fall, I checked everything out, like where the spare is and how to get at it. I found that the 30 year old spare had probably never been lowered and had "0" psi in it. I aired it up and it held air, so I put it back in place, hoping never to have to use it. I have to replace the Nitto tires that are now on it (10 years old) and it's good to know that I can also buy a new spare and replace it too.

06-29-2020	#13
lfalzarano Join Date: Feb 2011 Location: Clayton, North Carolina Posts: 1,133	Re: Ever wonder if a 30 year old spare works? Don?t forget to change out the valve on the spare. Sent from my iPhone using ZR-1 Net Registry __________________ Lou[COLOR="Red"][B][SIZE="4"][/SIZE][/B][/COLOR]

07-03-2020	#14
GOLDCYLON Join Date: May 2007 Location: Peoria, AZ Posts: 9,155	Re: Ever wonder if a 30 year old spare works? I recently replaced mine On my 91 but they are special order only from Discount Tire mine was rotted __________________ GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode