ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings
Reload this Page Cam Cover Emblem
Register FAQ Calendar Search Today's Posts Mark Forums Read

Reply
Page 2 of 4 1 2 34
 
Thread Tools Display Modes
Old 01-11-2008   #11
Jeffvette
Guest
 
Posts: n/a
Default Re: Cam Cover Emblem
Dan, go ahead and get a couple of samples done and lets see how it turns out.

djpatrick, I'm working on them this weekend.
  Reply With Quote
Old 01-11-2008   #12
GOLDCYLON
 
GOLDCYLON's Avatar
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
Default Re: Cam Cover Emblem
Quote:
Originally Posted by Jeffvette
Dan, go ahead and get a couple of samples done and lets see how it turns out.

djpatrick, I'm working on them this weekend.
Granny glasses on. That detailing is a PITA
__________________
GOLDCYLON - 91 ZR-1 #2014
GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's)
GOLDCYLON - 11 CTS-V


Arizona State Director




91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat

90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat

11 RED/GREY CTS-V
GOLDCYLON is offline   Reply With Quote
Old 01-12-2008   #13
Lowflight
 
Lowflight's Avatar
 
Join Date: Aug 2005
Location: Memphis TN
Posts: 201
Default Re: Cam Cover Emblem
I will take 2. I have one original GM one...if yours match it...then I need just one.
Lowflight is offline   Reply With Quote
Old 01-12-2008   #14
tomtom72
 
tomtom72's Avatar
 
Join Date: Dec 2004
Location: Jacksonville, FL USA
Posts: 4,645
Default Re: Cam Cover Emblem
I'm confused.....nothing new there

I thought the OEM emblems on the cam covers were plastic...or at least they look like plastic....and that's why they discolor after a while?

Aluminium would be sweet + powder coat or some super baked enamal finish. I would think that would be very durable either way....no chance for the heat to fade the colors, right?

__________________
1990 ZR-1, Black/grey, #2233, stock. ZR-1 Net Reg Founding Member #316 & NCM member
tomtom72 is offline   Reply With Quote
Old 01-12-2008   #15
Aurora40
 
Aurora40's Avatar
 
Join Date: May 2005
Location: Leesburg, VA
Posts: 2,713
Default Re: Cam Cover Emblem
Quote:
Originally Posted by Lowflight
I have one original GM one...if yours match it...then I need just one.
To my eye, I believe they are different. The OEM '91+ one has a red outlined "bowtie" that is black in the center. It looks like Jeff's is a red bowtie. Quite possibly because the detail of the OEM one is much too fine to try to replicate by hand?
__________________
Bob Saveland
Former owner of #2517

[IMG]http://a.random-image.net/aurora40/vette.jpg[/img]
Aurora40 is offline   Reply With Quote
Old 01-12-2008   #16
UKZR1
 
UKZR1's Avatar
 
Join Date: Feb 2004
Location: South East England
Posts: 173
Default Re: Cam Cover Emblem
I repainted my '90 badges when I reinstalled the engine. Hard on the eyes but doable if you have a steady hand
__________________
Red/red 90 #1281 (UK)
Marc Haibeck 368
B&B, Brembos
DRM suspension
Known as 'Gixer' on corvettechat.co.uk
www.corvetteclips.co.uk
UKZR1 is offline   Reply With Quote
Old 01-12-2008   #17
UKZR1
 
UKZR1's Avatar
 
Join Date: Feb 2004
Location: South East England
Posts: 173
Default Re: Cam Cover Emblem
here's a closer photo
__________________
Red/red 90 #1281 (UK)
Marc Haibeck 368
B&B, Brembos
DRM suspension
Known as 'Gixer' on corvettechat.co.uk
www.corvetteclips.co.uk
UKZR1 is offline   Reply With Quote
Old 01-13-2008   #18
djpatrick35
 
djpatrick35's Avatar
 
Join Date: Dec 2007
Location: Vernon Hills, IL
Posts: 262
Default Re: Cam Cover Emblem
Jeffvette is the man!
__________________
[B]1990 Black ZR-1 #2212[/B] Totaled... :(
[B]2007 Z51 'vert :mrgreen:[/B]
[B]1988 35th Ann. Edition #962[/B] (Sold...) :cry:
djpatrick35 is offline   Reply With Quote
Old 01-14-2008   #19
Dandy97
 
Dandy97's Avatar
 
Join Date: Jun 2005
Location: Tax Hell, Wisconsin
Posts: 53
Default Re: Cam Cover Emblem
Quote:
Originally Posted by tomtom72
I'm confused.....nothing new there

I thought the OEM emblems on the cam covers were plastic...or at least they look like plastic....and that's why they discolor after a while?

Aluminium would be sweet + powder coat or some super baked enamal finish. I would think that would be very durable either way....no chance for the heat to fade the colors, right?
The originals were aluminum and black anodized. It's the anodizing that turns purple with the heat exposure.
__________________
1991 ZR-1 #526 White/Red
1997 A4 Coupe
[url]http://www.dd-designgroup.com/studio409/studio409.htm[/url]
Dandy97 is offline   Reply With Quote
Old 01-14-2008   #20
Dandy97
 
Dandy97's Avatar
 
Join Date: Jun 2005
Location: Tax Hell, Wisconsin
Posts: 53
Default Re: Cam Cover Emblem
Quote:
Originally Posted by GOLDCYLON
Granny glasses on. That detailing is a PITA
After doing a hundred sets or so of these myself, I know why GM was charging $100.00 a piece.
__________________
1991 ZR-1 #526 White/Red
1997 A4 Coupe
[url]http://www.dd-designgroup.com/studio409/studio409.htm[/url]
Dandy97 is offline   Reply With Quote
Reply
Page 2 of 4 1 2 34

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 07:29 PM.

Contact Us - ZR-1 Net Registry - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020