ZR-1 Net Registry Forums  

Go Back   ZR-1 Net Registry Forums > C4 ZR-1 > C4 ZR-1 General Postings

Reply
 
Thread Tools Display Modes
Old 03-04-2019   #21
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
Default Re: Amazing Results after Haibeck work on my 90

Thanks Jeff, right now have flight booked for early tomorrow morning BWI to Midway. Should be at Marc's by 9 am and then start driving home around 10:00-10:30am. With the cold weather will plan on driving southeast through Columbus, Ohio rather than due east through the Pittsburg mountains. Will only drive during daylight hours as temps going to fall at night. So I will drive about 6 hours and then get a hotel once I pass Columbus,Ohio and then will only have 5 hours left on Wednesday. Just hope the roads are somewhat clear after the storm. Got to get the car out as Marc has people lined up and needs the space.
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 03-04-2019   #22
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Amazing Results after Haibeck work on my 90

AH cool, have a safe trip home
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Old 03-05-2019   #23
carmine
 
Join Date: Jun 2005
Location: Hanover,Ma.
Posts: 179
Default Re: Amazing Results after Haibeck work on my 90

Marc did a lot work on my 90 ayear ago .best money i ever spent i used reliable transport great service 1200.00 round trip mass.
carmine is offline   Reply With Quote
Old 03-05-2019   #24
JMO343
 
Join Date: Jul 2018
Location: Patchogue, NY
Posts: 135
Default Re: Amazing Results after Haibeck work on my 90

Really. I just got a quote from reliable also and it was $1,800 each way. $3,600 round trip. Crazy.

John
1990 #2331
JMO343 is offline   Reply With Quote
Old 03-06-2019   #25
carmine
 
Join Date: Jun 2005
Location: Hanover,Ma.
Posts: 179
Default Re: Amazing Results after Haibeck work on my 90

My mistake Reliable 1200.00 one way but very happy with service
carmine is offline   Reply With Quote
Old 03-07-2019   #26
dredgeguy
 
dredgeguy's Avatar
 
Join Date: Aug 2012
Location: Ellicott City, MD
Posts: 1,714
Default Re: Amazing Results after Haibeck work on my 90

Well boys, 1992 #246 is home safe and sound after spending time with Marc. Was quoted $750-$1100 to have it put on a trailer back to Maryland. The roads were dry and the weather looked clear for 3 days so I figured, $49 one way Southwest airlines ticket, spend one night in hotel in Ohio and home free. What could go wrong.........I planned a southerly route through Columbus, Ohio rather than the mountains of Pittsburg but hit lots of snow squalls in Ohio. Some lasted a couple of minutes and no problem but a couple were 30 minute white outs with lots of accumulation. Scared the crap out of me driving in up to 2" of snow and slush on the highways with PS2's but made it to Zanesville, Ohio where I had a hotel booked. On TV that night I saw there was a 60 car pile up on the highway I just got off....time for a couple of drinks to calm the nerves!

But it was all worth it. She drove home like a champ. I just had to rinse off all the salt when I got home.

Engine polished, what can I say....bling! I had to have Marc sign the hood as well. Engine top end porting resulted with 394.51 Hp at the wheels, 351.36 Torque. Marc did a long list of things for me including a DeWitts fan assembly, LED tail lights and new Powermaster 37864 alternator which has 38% more current output than the OE unit. OE is 124 amps, the 37864 has 200 amps. It provides higher system voltage at idle and thus higher fan speeds for the engine fans as well as the AC blower motor. The increased power to the blower resulting in a huge increased amount of air flow out of the vents. Marc was able to measure the airflow and said it went from 10 mph to 14 mph out of the vents after the mod. I believe this will make summer driving much more comfortable, no more overheating concerns in stopped traffic and good air flow with the AC. Some pics for your enjoyment.
Attached Images
File Type: jpg 20190305_093453 (2).jpg (120.0 KB, 103 views)
File Type: jpg 20190305_100407 (2).jpg (78.2 KB, 75 views)
File Type: jpg 20190306_151108 (2).jpg (146.8 KB, 84 views)
File Type: jpg RunFile_002 (2).jpg (96.9 KB, 69 views)
__________________
Charlie

__________
Dredgeguy
WAZOO Member

1992 Bright Red/Black ZR1 #246
Dana 4:10 gears
Polished LT5 by Haibeck
Polished Fikse FM5's with Michelin Pilot Sport 2
Stainless Works headers and cats with Corsa
dredgeguy is offline   Reply With Quote
Old 03-07-2019   #27
Vette73
 
Join Date: Nov 2014
Location: Brooklyn ny
Posts: 1,045
Default Re: Amazing Results after Haibeck work on my 90

Oh man....Glad your home safe ....Rear wheel drive, in snow, on performance tires is no joke...
Vette73 is offline   Reply With Quote
Old 03-07-2019   #28
WARP TEN
 
WARP TEN's Avatar
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,096
Default Re: Amazing Results after Haibeck work on my 90

Glad you made it home safely Charlie. My wife and I just finished a 3,500 mile driving trip (BMW, not Z06) to Florida's west and east coasts, then up the east coast through Seabrook Island and Asheville visiting friends. We were due to overnight in Louisville Saturday but with a snow storm predicted for Sunday all along our route we bit the bullet and drove straight through (11 hours) from Asheville on Saturday in good weather. It turned out to be a very good decision. But after more than a week of 80 degrees and sunny, we returned to 4 below on Sunday. Why do we live in Illinois?!? Beautiful engine--enjoy your "new" car!--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z"
1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts
--Sold but still running strong
1993 Quasar Blue #161 "HIL KING"
--Sold but still running strong, now with more than 120,000 miles
1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd
--Sold a long time ago
ZR-1 Net Registry Founding Member #95
NCM Lifetime Member
Favorite Quote--Attributed to Mickey Thompson:
"Too Much Horsepower is Almost Enough"

Last edited by WARP TEN; 03-07-2019 at 11:14 AM.
WARP TEN is offline   Reply With Quote
Old 03-07-2019   #29
efnfast
 
Join Date: Nov 2011
Location: Dunbarton NH
Posts: 7,492
Default Re: Amazing Results after Haibeck work on my 90

SAWEEEEETTTT!
efnfast is offline   Reply With Quote
Old 03-07-2019   #30
-=Jeff=-
 
-=Jeff=-'s Avatar
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
Default Re: Amazing Results after Haibeck work on my 90

I am interested in more alternator details, I sent Marc an email
__________________
1990 Corvette ZR-1 #1051
Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback
Late Model IH - Plenum
Coilovers - 4.10s
Custom Interior
NCM Lifetime Member #978
-=Jeff=- is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:36 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ZR-1 Net Registry 2020