Beast #2 heads to Chicago! - Page 2 - ZR-1 Net Registry Forums

Karl · 06-19-2018

That was Beast #1.

I have not been to the NCM in quite a few years....

Karl · 06-20-2018

The car has arrived.

conesare2seconds · 06-20-2018

Great. Glad it went to a good home.

Karl · 06-24-2018

Took some pictures today.

Karl · 06-24-2018

I need to register the car.
I managed to take a quick joy ride around the neighborhood and the car with the 4.09 gears is pretty fast. Easily spins the tires through first gear.

There are a few miscellaneous problems.

1) ses light with a code 16
2) waiting for delivery of the driver side headlight cover.
3 the center digital display does not work. No mph, fuel level, etc. Gotta fix that.

Besides that the car is very clean and with the old b&b exhaust loud too.

Karl · 06-24-2018

I am planning the following mods to the car:

1) lightweight flywheel
2) Camaro clutch
3) lightweight pulley set w/underdrive for the water pump.
4) x pipe to replace resonator
5) coil over suspension
6) Vette 2 Vette frame stiffeners
7) oil catch can
8) relocate battery to rear
9) silicone hoses
10) short throw shifter
11) zd doc beam plates
12) drm camber rod brackets
13) ACI cold air intake
14) Dewitt's aluminum radiator

-=Jeff=- · 06-24-2018

It has 2 roofs right? is the acrylic roof cracked? looked like it in one of the earlier pictures.

Are you sure it does not have the aluminum flywheel?

Which Short Shifter?

Karl · 06-24-2018

I need to double check the ses code too. I forget if it was 61 or 16.

I have both tops and the clear is not cracked. I will double check it. I have not had much time to work or look at the car until this weekend.

Going with either a Hurst of zf doc shifter.

I hear no rattle and no mention in the records of a light flywheel installed.

-=Jeff=- · 06-24-2018

could have been power lines across when looking up and through in one of the pictures I saw which is why I asked

Karl · 06-24-2018

No problem. The car will not be winning any NCRS awards for being all original!

But I really like it and everyone who didn't buy this car missed out on one heck of a deal and car.

😀

06-19-2018	#11
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! That was Beast #1. I have not been to the NCM in quite a few years.... __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

06-20-2018	#12
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! The car has arrived. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

06-20-2018	#13
conesare2seconds Join Date: Jul 2016 Location: Greater St. Louis Posts: 490	Re: Beast #2 heads to Chicago! Great. Glad it went to a good home.

06-24-2018	#14
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! Took some pictures today. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

06-24-2018	#15
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! I need to register the car. I managed to take a quick joy ride around the neighborhood and the car with the 4.09 gears is pretty fast. Easily spins the tires through first gear. There are a few miscellaneous problems. 1) ses light with a code 16 2) waiting for delivery of the driver side headlight cover. 3 the center digital display does not work. No mph, fuel level, etc. Gotta fix that. Besides that the car is very clean and with the old b&b exhaust loud too. __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

06-24-2018	#16
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! I am planning the following mods to the car: 1) lightweight flywheel 2) Camaro clutch 3) lightweight pulley set w/underdrive for the water pump. 4) x pipe to replace resonator 5) coil over suspension 6) Vette 2 Vette frame stiffeners 7) oil catch can 8) relocate battery to rear 9) silicone hoses 10) short throw shifter 11) zd doc beam plates 12) drm camber rod brackets 13) ACI cold air intake 14) Dewitt's aluminum radiator __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold Last edited by Karl; 04-27-2020 at 11:30 PM.

06-24-2018	#17
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Beast #2 heads to Chicago! It has 2 roofs right? is the acrylic roof cracked? looked like it in one of the earlier pictures. Are you sure it does not have the aluminum flywheel? Which Short Shifter? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

06-24-2018	#19
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Beast #2 heads to Chicago! could have been power lines across when looking up and through in one of the pictures I saw which is why I asked __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

06-24-2018	#20
Karl Join Date: May 2013 Location: Chicago Posts: 980	Re: Beast #2 heads to Chicago! No problem. The car will not be winning any NCRS awards for being all original! But I really like it and everyone who didn't buy this car missed out on one heck of a deal and car. 😀 __________________ 1993 ZR-1 #211 Yellow On Beige Beast #2 1992 ZR-1 #427 Black On Black Sold 1985 L98 Blue On Blue Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode