|
11-04-2017
|
#31 |
|
Join Date: Jul 2011
Location: woodstock il
Posts: 30
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Had a feeling it was something like that or a son/daughter asking, some things don't make sense but the story is relatively consistent, it sounds like she wants to keep it more than he does but might not be willing or able to do what needs to be done to save it. she says that 1300 is too high for a harness, I can't imagine that the cost to have it installed it would be inexpensive and it sounds like that is the route that she would need to go rather than d.i.y.
still I would love to see/hear more about how this ends up if its real. also im gonna try to get a new thread started about this car in the hypothetical to see how others feel about a car like this |
|
|
|
11-04-2017
|
#32 | |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,081
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Quote:
|
|
|
|
|
|
11-04-2017
|
#33 |
|
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,081
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Regardless of the outcome here I hope this car is saved,in the garage out if the sun did something to save the car.
|
|
|
|
|
11-07-2017
|
#34 |
  
Join Date: Jul 2005
Location: San Antonio, TX
Posts: 652
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
I've restored a C4 from EXTENSIVE mouse damage, and so glad I did. I repaired all of the wiring harnesses that were damaged, and went through the cleaning process for each piece of interior plastic and carpet. You'd never know there was ever any damage when I finished, let alone the extent of it.
If you would like to discuss what is involved, I'll be glad to share my experience. Feel free to PM or email me at president@zr1netregistry.com. Regards, Mark
__________________
Mark Horner President, ZR-1 Net Registry 91 ZR-1 #2016 95 ZR-1 #21 DRM-600, LPE 385 |
|
|
|
|
11-22-2017
|
#35 |
 
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,171
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Whatever was determined with this car?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
11-22-2017
|
#36 | |
 
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
11-22-2017
|
#37 |
|
Join Date: Jul 2011
Location: woodstock il
Posts: 30
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
I get the feeling that she wanted to fix it more that the husband did but didn't realize the cost that would be involved. it seemed that everything was going to needed to be done at a shop so the repairs would have cost much more than they might have been willing to put into it. again just a feeling no first hand knowledge but if you go back and read what they posted it leads to them either putting it back in storage or parting it out due to cost.
|
|
|
|
|
11-22-2017
|
#38 | |
|
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Quote:
The owner told me she want to get it running as she was heading to the east coast mid next year. Her thoughts it would be easier to get it on a trailer. I have not heard from her since so I cant really comment further. She has my phone number and I gave her parts advise and a mechanic's name. Maybe that's all she wanted. No idea.
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director 91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
11-29-2017
|
#39 |
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,755
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
What harnesses do you heed. Just the engine harnes?
Or all under hood ones? I have harnesses just sitting in my attic
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
|
11-29-2017
|
#40 |
|
Join Date: Jul 2004
Location: Kalamazoo MI
Posts: 1,755
|
Re: wanted: complete wire harness and all hoses for 1990 ZR1
Im also interested in this car as is but Id want to fly out and see it in person.
__________________
JOHNNY P Currently own 90 ZR-1 #845 DRM 500 engine package 90 #226 Parts car Hit me up if you need anything. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
