427 LT5

[Thomas ZR-1]

No one an idea, where I can buy the parts that I need?

[Jagdpanzer]

As far as I'm aware 4.125" cylinder liners are only available from shops who also perform the necessary machine work on the block in order to fit them.

[XfireZ51]

Originally Posted by Jagdpanzer

As far as I'm aware 4.125" cylinder liners are only available from shops who also perform the necessary machine work on the block in order to fit them.

Phil,

As u said, and Pete or Al could provide more detail, but the closed deck block for the 427 is built by the company that also does the liners. Its not a kit u buy and put together yourself. Once the block is modified, then u can put the rest of the motor together. One of the reasons I suggested sending th motor here.

[A26B]

Originally Posted by Thomas ZR-1

Hi guys I`ve got a question and hope to find some help here in the forum. I´m looking for parts to enlarge my LT5 to 427 cui. I asked Pete and he can regrind a set of stock cams for this engine modification. He told me that he would prefer a 4.00" stroke and 4.125" bore for this engine size with closed deck sleeves. so my question is: where can I buy the needed parts (crankshaft, rods, pistons, cylinder head gaskets and sleeves). I think some of you did this mod in the past, what would be the costs for the parts?

Thanx, Thomas

Contact http://toddpepmeier.wixsite.com/pepmeierengines/contact

Your request is Todd's specialty. He will be able to provide you with the necessary information & guidance.

[Thomas ZR-1]

Thank you Jerry, I sent him an email.