New Ignition Key - ZR-1 Net Registry Forums

Hammer · 10-03-2007

Folks,
I just finished getting keys made for my ZR-1 and Firebird. Thught I would share. I got the key blanks from an ebay seller. They were $9.89 apiece plus $3.00 shipping. Walmart cut the keys for free. They said they charge for the key not the cut. Total for the two VATS keys was $24.43 (insurance included) shipped. I got them in two days from Chatsworth, CA. So I ended up getting both the VATS keys for less than the dealer wanted for just one, which was $27.00. I now have spare ignition keys for both vehicles. WHEW.

This seller has instructions on each auction (he also has a website) on how to figure the key needed. You just have to know how (or know someone who does) to use a multimeter to measure the resistance of the keys.

http://cgi.ebay.com/ebaymotors/1986-...1774QQtcZphoto

GOLDCYLON · 10-03-2007

Quote:

Originally Posted by Hammer

Folks,
I just finished getting keys made for my ZR-1 and Firebird. Thught I would share. I got the key blanks from an ebay seller. They were $9.89 apiece plus $3.00 shipping. Walmart cut the keys for free. They said they charge for the key not the cut. Total for the two VATS keys was $24.43 (insurance included) shipped. I got them in two days from Chatsworth, CA. So I ended up getting both the VATS keys for less than the dealer wanted for just one, which was $27.00. I now have spare ignition keys for both vehicles. WHEW.

This seller has instructions on each auction (he also has a website) on how to figure the key needed. You just have to know how (or know someone who does) to use a multimeter to measure the resistance of the keys.

http://cgi.ebay.com/ebaymotors/1986-...1774QQtcZphoto

John you can just take your key to ACE hardware and they can read the key number for you as well. My local ACE has the equipment. Now if you dont have a key to read well then the ohm method is real darn handy lol. GC

petefias · 10-04-2007

Quote:

Originally Posted by Hammer

Folks,
I just finished getting keys made for my ZR-1 and Firebird. Thught I would share. I got the key blanks from an ebay seller. They were $9.89 apiece plus $3.00 shipping. Walmart cut the keys for free. They said they charge for the key not the cut. Total for the two VATS keys was $24.43 (insurance included) shipped. I got them in two days from Chatsworth, CA. So I ended up getting both the VATS keys for less than the dealer wanted for just one, which was $27.00. I now have spare ignition keys for both vehicles. WHEW.

This seller has instructions on each auction (he also has a website) on how to figure the key needed. You just have to know how (or know someone who does) to use a multimeter to measure the resistance of the keys.

http://cgi.ebay.com/ebaymotors/1986-...1774QQtcZphoto

That's interesting. My security key has a code of 2 (I owned this car since new), but according to the info on the link my code suppose to be 11. Who do I believe? The tag that came with the original key or the web site?

GOLDCYLON · 10-04-2007

Quote:

Originally Posted by petefias

That's interesting. My security key has a code of 2 (I owned this car since new), but according to the info on the link my code suppose to be 11. Who do I believe? The tag that came with the original key or the web site?

My guess is its not an exact science since you know its a code 2.

Aurora40 · 10-05-2007

I got keys made for my '87 and at first the old one tested out wrong. The replacement didn't work. Then the dealer looked it up by VIN and got me a key that worked. The pellets wear down over time, it may be the resistance changes enough from that to look like a different key number?

ZRWON · 10-05-2007

Quote:

Originally Posted by Hammer

Folks,
I just finished getting keys made for my ZR-1 and Firebird. Thught I would share. I got the key blanks from an ebay seller. They were $9.89 apiece plus $3.00 shipping. Walmart cut the keys for free. They said they charge for the key not the cut. Total for the two VATS keys was $24.43 (insurance included) shipped. I got them in two days from Chatsworth, CA. So I ended up getting both the VATS keys for less than the dealer wanted for just one, which was $27.00. I now have spare ignition keys for both vehicles. WHEW.

This seller has instructions on each auction (he also has a website) on how to figure the key needed. You just have to know how (or know someone who does) to use a multimeter to measure the resistance of the keys.

http://cgi.ebay.com/ebaymotors/1986-...1774QQtcZphoto

JOHN, Here's a link to all you ever wanted to know, and more, about VATS key codes, measuring resistance, etc and the link to CLK SUPPLIES where I've purchased several blank keys for $3.25 each + a ~ buck S&H (phone # is 800-848-6989)
http://forums.corvetteforum.com/show...ight=VATS+KEYS

.

GOLDCYLON · 10-05-2007

Quote:

Originally Posted by Aurora40

I got keys made for my '87 and at first the old one tested out wrong. The replacement didn't work. Then the dealer looked it up by VIN and got me a key that worked. The pellets wear down over time, it may be the resistance changes enough from that to look like a different key number?

Sounds like a reasonable speculation to me.

10-03-2007	#1
Hammer Join Date: Apr 2006 Location: Ideho Posts: 2,653	New Ignition Key Folks, I just finished getting keys made for my ZR-1 and Firebird. Thught I would share. I got the key blanks from an ebay seller. They were $9.89 apiece plus $3.00 shipping. Walmart cut the keys for free. They said they charge for the key not the cut. Total for the two VATS keys was $24.43 (insurance included) shipped. I got them in two days from Chatsworth, CA. So I ended up getting both the VATS keys for less than the dealer wanted for just one, which was $27.00. I now have spare ignition keys for both vehicles. WHEW. This seller has instructions on each auction (he also has a website) on how to figure the key needed. You just have to know how (or know someone who does) to use a multimeter to measure the resistance of the keys. http://cgi.ebay.com/ebaymotors/1986-...1774QQtcZphoto __________________ [I][FONT=Comic Sans MS]John Boyd[/FONT][/I] [I][FONT=Comic Sans MS][SIZE=1]Ideho[/SIZE][/FONT][/I] [FONT=Comic Sans MS][SIZE=1][I]2015 ZL1 [/I][I]Camaro #1121 BLACK/BLACK 6 SPD (540 RWHP)[/I][/SIZE][/FONT] [I][FONT=Comic Sans MS][SIZE=1]1991 ZR-1 #458 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK 72[/COLOR]k miles ([B][COLOR=red]SOLD[/COLOR][/B]) 1991 ZR-1 #473 [COLOR=red]RED/[/COLOR][COLOR=black]BLACK [/COLOR]37k miles ([B][COLOR=red]SOLD[/COLOR][/B])[/SIZE][/FONT][/I]

10-05-2007	#5
Aurora40 Join Date: May 2005 Location: Leesburg, VA Posts: 2,713	Re: New Ignition Key I got keys made for my '87 and at first the old one tested out wrong. The replacement didn't work. Then the dealer looked it up by VIN and got me a key that worked. The pellets wear down over time, it may be the resistance changes enough from that to look like a different key number? __________________ Bob Saveland Former owner of #2517 [IMG]http://a.random-image.net/aurora40/vette.jpg[/img]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode