1990 ZR-1 #849 - ZR-1 Net Registry Forums

epaul77055 · 10-03-2015

Have been working on car since 9:00 am. I changed the oil in transmission, Installed Corsa Cat back system, changed one o2 sensor-Does anyone have any tips for the passenger side; I am not sure where the plug end is--Do I take the insulation off the lower mount to find it? I want to replace the sensor before I take it off of jackstands. Any help would be greatly appreciated. P. Smith

Demps · 10-03-2015

Remove passenger k-frame--4 bolts.
Ted

Z51JEFF · 10-03-2015

Plugging the sensor back in is going to try your patients. The plug is almost up against the block.

10-03-2015	#1
epaul77055 Join Date: Jan 2012 Location: Houston, Texas Posts: 17	1990 ZR-1 #849 Have been working on car since 9:00 am. I changed the oil in transmission, Installed Corsa Cat back system, changed one o2 sensor-Does anyone have any tips for the passenger side; I am not sure where the plug end is--Do I take the insulation off the lower mount to find it? I want to replace the sensor before I take it off of jackstands. Any help would be greatly appreciated. P. Smith

10-03-2015	#2
Demps Join Date: Jan 2006 Location: Niceville Posts: 998	Re: 1990 ZR-1 #849 Remove passenger k-frame--4 bolts. Ted

10-03-2015	#3
Z51JEFF Join Date: Dec 2007 Location: Fremont,Ca Posts: 3,079	Re: 1990 ZR-1 #849 Plugging the sensor back in is going to try your patients. The plug is almost up against the block.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode