Best Source for 4" Liners for 368 - ZR-1 Net Registry Forums

alnukem · 07-23-2015

Hi, I bought Mitsumark's 91 368 last year after he threw in the towel. It's determined that the liners are shot. What is the best (read "most economical") place to buy the liners machined & ready to be installed? Thanks!

LGAFF · 07-23-2015

LA sleeve

Jagdpanzer · 07-23-2015

LA Sleeve liners come in around 0.010" under sized and have to be finished honed in the block in a precision honing machine with a deck plate. We have a good motor machine shop down here in WAZOO land that does this work for us. Surprised to hear the existing 4.000" liners are gone already. They are usually made from ductile iron which is a pretty tough material that should last almost forever under normal circumstances, provided the enitial build was done right. Can you post some photos?

Paul Workman · 07-23-2015

LA Sleeve also provides pistons as well. Marc Haibeck has used them on some of his upgrade projects.

pantera1683 · 07-23-2015

Quote:

Originally Posted by alnukem

Hi, I bought Mitsumark's 91 368 last year after he threw in the towel. It's determined that the liners are shot. What is the best (read "most economical") place to buy the liners machined & ready to be installed? Thanks!

I have a set of brand new custom Venolia 4" pistons for sale. I was going to use them for a 402 build but decided to build a 427. Here is a link to my ad http://zr1.net/forum/showthread.php?t=24599&highlight=venolia

Let me know if you're interested in them.

alnukem · 07-23-2015

Quote:

Originally Posted by pantera1683

I have a set of brand new custom Venolia 4" pistons for sale. I was going to use them for a 402 build but decided to build a 427. Here is a link to my ad http://zr1.net/forum/showthread.php?t=24599&highlight=venolia

Let me know if you're interested in them.

Thanks...I already have pistons, just need sleeves.

07-23-2015	#1
alnukem Join Date: Jan 2010 Location: Freedom Pa Posts: 275	Best Source for 4" Liners for 368 Hi, I bought Mitsumark's 91 368 last year after he threw in the towel. It's determined that the liners are shot. What is the best (read "most economical") place to buy the liners machined & ready to be installed? Thanks!

07-23-2015	#2
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Best Source for 4" Liners for 368 LA sleeve __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

07-23-2015	#3
Jagdpanzer Join Date: Apr 2007 Location: Northern VA Posts: 2,661	Re: Best Source for 4" Liners for 368 LA Sleeve liners come in around 0.010" under sized and have to be finished honed in the block in a precision honing machine with a deck plate. We have a good motor machine shop down here in WAZOO land that does this work for us. Surprised to hear the existing 4.000" liners are gone already. They are usually made from ductile iron which is a pretty tough material that should last almost forever under normal circumstances, provided the enitial build was done right. Can you post some photos? __________________ Phil Wasinger 1994 Torch Red ZR-1 WAZOO Member George Braml Intake

07-23-2015	#4
Paul Workman Join Date: Nov 2007 Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri Posts: 6,493	Re: Best Source for 4" Liners for 368 LA Sleeve also provides pistons as well. Marc Haibeck has used them on some of his upgrade projects. __________________ Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode