|
07-20-2015
|
#1 |
 Join Date: Jul 2015
Location: Anchorage, Alaska
Posts: 8
|
Part Wanted: A/C Condenser Case for 1991 ZR-1
Searching for a used A/C condenser case for a 1991 ZR-1. Original is broken with a large hole preventing air from reaching vents. Have tried Eckler's and Corvette Generation with no success. Any recommendations on where to locate this part would be greatly appreciated.
|
|
|
|
07-23-2015
|
#2 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Part Wanted: A/C Condenser Case for 1991 ZR-1
Quote:
Sent you a Email for this ZR-1 Specific part
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
07-24-2015
|
#3 |
Join Date: Jul 2007
Location: Bartlett, IL
Posts: 7,169
|
Re: Part Wanted: A/C Condenser Case for 1991 ZR-1
don't you mean Evaporator case?
__________________
1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978 |
|
|
|
|
07-24-2015
|
#4 |
 
Join Date: May 2004
Posts: 451
|
Re: Part Wanted: A/C Condenser Case for 1991 ZR-1
i have a used on from my 91 zr-1 19k miles on it
|
|
|
|
|
07-27-2015
|
#5 |
|
Join Date: Jul 2015
Location: Anchorage, Alaska
Posts: 8
|
Re: Part Wanted: A/C Condenser Case for 1991 ZR-1
Jeff: Yes, thanks for the correction. I believe that is what it is called. A photo of the part and damaged area is attached.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
