WTB Working ECM - Page 2 - ZR-1 Net Registry Forums

-=Jeff=- · 07-08-2015

Quote:

Originally Posted by G8nightman

How much do you want for it?

I honestly don't want to sell it, I know not what you wanted to hear, I do want to get it fixed..

pantera1683 · 07-08-2015

Check Jerry of Jerry's Gaskets. I exchanged my old ECM for a rebuilt one last year.

cvette98pacecar · 07-09-2015

Do you need it because your car is not running? Or, Do you need it as a spare?

G8nightman · 07-09-2015

Car is running but am getting a knock sensor issue code 43 replaced the sensor tested the run between the sensor and the ecm all are good ECM i think is the only thing left to replace.

-=Jeff=- · 07-09-2015

what about trying a different memcal. I seem to recall it has the ESC (knock) control on it..

G8nightman · 07-09-2015

I'm running Marc's chip wont that by pass the factory chip?

-=Jeff=- · 07-09-2015

Depends.

Did you remove your memcal and replace it? or do you have a adapter board in the ECM?

if you replaced it.. swap in your factory chip and see if the code is still there.. if so then ECM, if not, then I suspect the little PCB on the MEMCAL

G8nightman · 07-09-2015

I have the adapter board "piggy back"

-=Jeff=- · 07-09-2015

okay.. check to be sure the MEMCAL is on correct and tight..

IF so get another MEMCAL to verify that is not the issue

G8nightman · 07-09-2015

I will look for a new memcal its on right I have check it before thanks for the tip.

07-08-2015	#12
pantera1683 Join Date: Mar 2010 Location: Fort Worth, TX Posts: 396	Re: WTB Working ECM Check Jerry of Jerry's Gaskets. I exchanged my old ECM for a rebuilt one last year.

07-09-2015	#13
cvette98pacecar Join Date: May 2011 Location: Sydney, Australia Posts: 2,479	Re: WTB Working ECM Do you need it because your car is not running? Or, Do you need it as a spare? __________________ Robert J. DeMarco [SIGPIC][/SIGPIC] [COLOR=blue]G[/COLOR][COLOR=red]rand[/COLOR] [COLOR=blue]S[/COLOR][COLOR=red]port[/COLOR] Registry Lifetime Member NCM Lifetime Member #2655 Pacecar Registry Member [COLOR=red]ZOOM Charter Member - ZR-1 Owners of Michigan[/COLOR] [COLOR=plum][I]ZR-1[/I] Registry member since 2012 [/COLOR] [COLOR=black]1990 LPE "368" Aerobody ZR-1, Last ZR-1 built by John[/COLOR] 1991 Callaway Aerobody ZR-1, DRM 500 1991 Shinoda Aerobody Spyder, 1998 Pace Car

07-09-2015	#14
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: WTB Working ECM Car is running but am getting a knock sensor issue code 43 replaced the sensor tested the run between the sensor and the ecm all are good ECM i think is the only thing left to replace. __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

07-09-2015	#15
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: WTB Working ECM what about trying a different memcal. I seem to recall it has the ESC (knock) control on it.. __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-09-2015	#16
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: WTB Working ECM I'm running Marc's chip wont that by pass the factory chip? __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

07-09-2015	#17
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: WTB Working ECM Depends. Did you remove your memcal and replace it? or do you have a adapter board in the ECM? if you replaced it.. swap in your factory chip and see if the code is still there.. if so then ECM, if not, then I suspect the little PCB on the MEMCAL __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-09-2015	#18
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: WTB Working ECM I have the adapter board "piggy back" __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

07-09-2015	#19
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: WTB Working ECM okay.. check to be sure the MEMCAL is on correct and tight.. IF so get another MEMCAL to verify that is not the issue __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-09-2015	#20
G8nightman Join Date: Dec 2007 Location: NYC Posts: 1,189	Re: WTB Working ECM I will look for a new memcal its on right I have check it before thanks for the tip. __________________ 90 Chevy ZR1 LPE #2315 'SOLD' 90 Chevy ZR1 LPE #2774 'SOLD' 91 Chevy ZR1 Callaway aerobody 91 Chevy ZR1 #1512 91 Chevy ZR1 #951 95 Chevy ZR1 #338 'SOLD' 91 BMW 850i 94 BMW 850csi 95 BMW 850csi 94 Lotus Esprit S4 07 Benz CLS550 06 BMW M5 "SOLD"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode