Learning to tune.... - Page 2 - ZR-1 Net Registry Forums

XfireZ51 · 07-03-2014

Quote:

Originally Posted by mike100

Not sure if it is even possible with the GM ecm's, but I wish the TunerProRT hit-tracing feature was functional. I would love to see what areas on certain tables are being called on during any given load situation.

Mike,

Altho not real-time, VETuner will highlight those areas as it is recalcing the VE table. V2.0 will show what areas are being changed using color coding to show whether it's moving it richer, leaner, or no change in each cell and by how much. Up to now I do a compare of the previous bin w new bin in TPRT WHERE IT SHOWS +/- in each cell.

Schrade · 07-03-2014

Quote:

Originally Posted by XfireZ51

Mike,

Altho not real-time, VETuner will highlight those areas as it is recalcing the VE table. V2.0 will show what areas are being changed using color coding to show whether it's moving it richer, leaner, or no change in each cell and by how much. Up to now I do a compare of the previous bin w new bin in TPRT WHERE IT SHOWS +/- in each cell.

Seems like we've gone right to advanced tuning here, from "Learning to tune"...

What does a wideband lm1 do? How does it work? Screenshots? Snappics?

-=Jeff=- · 07-03-2014

VETuner:

LGAFF · 07-03-2014

I will get things back on track....once I get the datalogging equipment I will go over setup, software choice, etc. Move into data available, how tos...will do the same for the wideband.

XfireZ51 · 07-03-2014

Quote:

Originally Posted by Schrade

Seems like we've gone right to advanced tuning here, from "Learning to tune"...

What does a wideband lm1 do? How does it work? Screenshots? Snappics?

This isn't advanced tuning. It was an answer to mike100's question. And modifying the VE table is very basic stuff.

LGAFF · 07-05-2014

Got the Xtreme ALDL and cables, first challenge....Tunepro RT says hardware not found.....I see Shrade had the same issue.

-=Jeff=- · 07-05-2014

You need to setup the COM port. Did windows detect the hardware correctly? Also do you have the correct ADX definition file?

LGAFF · 07-05-2014

Its says its working properly(hardware) and I have the 8E adx file from Tunerpros website

Computer shows a properly working FT232R USB UART

-=Jeff=- · 07-05-2014

Not sure that ADX works.. I have a better one I know works

LGAFF · 07-05-2014

No luck, I did find out that for just logging you hit the arrows....hardware only shows with an emulator....but still not working

07-03-2014	#13
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Learning to tune.... VETuner: __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-03-2014	#14
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Learning to tune.... I will get things back on track....once I get the datalogging equipment I will go over setup, software choice, etc. Move into data available, how tos...will do the same for the wideband. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

07-05-2014	#16
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Learning to tune.... Got the Xtreme ALDL and cables, first challenge....Tunepro RT says hardware not found.....I see Shrade had the same issue. __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

07-05-2014	#17
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Learning to tune.... You need to setup the COM port. Did windows detect the hardware correctly? Also do you have the correct ADX definition file? __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-05-2014	#18
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Learning to tune.... Its says its working properly(hardware) and I have the 8E adx file from Tunerpros website Computer shows a properly working FT232R USB UART __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359 Last edited by LGAFF; 07-05-2014 at 08:47 PM.

07-05-2014	#19
-=Jeff=- Join Date: Jul 2007 Location: Bartlett, IL Posts: 7,169	Re: Learning to tune.... Not sure that ADX works.. I have a better one I know works __________________ 1990 Corvette ZR-1 #1051 Watson Headers (2" Primary) - Flowmaster Cats - Borla Catback Late Model IH - Plenum Coilovers - 4.10s Custom Interior NCM Lifetime Member #978

07-05-2014	#20
LGAFF Join Date: Mar 2007 Location: Crystal Lake, IL Posts: 7,194	Re: Learning to tune.... No luck, I did find out that for just logging you hit the arrows....hardware only shows with an emulator....but still not working __________________ LGAFF 90 #966-150K miles-sold 92 #234-sold 1987 Callaway TT #17 1991 ZR-1 #1359

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode