|
06-23-2014
|
#1 |
 
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,096
|
Repair for weather stripping?
There is currently a thread about treatments for weather stripping. I was wondering if there is any repair product for weather stripping that is starting to chip and crack to avoid outright replacement. Any type of rubber caulk like material that might be smoothed into those spots to make it at least a little better before I have to replace it. My A pillar rubber is getting a bit rough.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
|
|
06-23-2014
|
#2 | |
   
Join Date: May 2007
Location: Peoria, AZ
Posts: 9,155
|
Re: Repair for weather stripping?
Quote:
__________________
GOLDCYLON - 91 ZR-1 #2014 GOLDCYLON - 90 ZR-1 #2794, 4L60e (Formerly Schrade's) GOLDCYLON - 11 CTS-V Arizona State Director  91 WHITE/BLACK #2014. 380 P&P&PCed,Ported Heads, Jeal Long tubes, Corsa Exhaust/FIKSE FM-5s /LED TLs, LED Headlights, Front Wilwood 6 piston narrowlite calipers and rear Wilwood caliper street shop mod,CNCed Coolant Pipes,TPI Cvr,Filter cover,Stainless Bolts, DRM/DOM PROM /ZFDOC mod build #102,DRLs,BMAD with stainless Debris Screen,Coplan Air Blaster, Pioneer APP Radio 4,Brey-Krause HB,Sub Bar,Fire extinguisher seat mount,DRM Coilovers,LEDs everywhere,Compass mirror (orange),V1 DIC hidden display, Homelink sun visor, Carbon Fiber top x3 and APSIS Carbon Fiber interior, APSIS CF Steering Wheel/NAPA Leather, Banski trailing arms, Guldstrand front suspension,urethane bushings from Prothane (total suspension) ZFDoc drive shaft safety loop, raptor shift light (orange),AO engineering louver front plate, Console seat cushion, 96CE seats with black custom Sheepskins, ss billet catch can,Viper remote entry/alarm,Cragar Rear Louvers,LED side louver lights, Dewitts Radiator with SPAL fans and a Woods 160 T-Stat 90 RED/BLACK #2794. 4L60e Automatic Stage V by RPM Transmission, TCI Dedicated TCM, OBX Stainless Headers, Corsa Exhaust, SAN Secondaries and Haibeck PROM, Exotic Muscle Coil overs, LED Interior Lights, LED Tail Lights, LED Headlights, 94 Sport seats with black custom Sheepskins , Cragar rear louvers, GS Front calipers, Banski Trailing arms, APSIS Carbon Fiber steering wheel, Front and Rear Baer Eradispeeds, DRLs, Guldstrand front suspension,urethane bushings from Prothane (total suspension), Dewitt's Raditor with Dual SPAL fans and a Haibeck 170 T-Stat 11 RED/GREY CTS-V |
|
|
|
|
|
06-23-2014
|
#3 | |
|
Join Date: Apr 2004
Location: ATL. GA.
Posts: 2,170
|
Re: Repair for weather stripping?
Quote:
__________________
Steve 1990 Steel Blue/Black #2355 1990 Red/Red #1473 1991 Quasar /Black #118 Sold 1991 Turquoise/Black #766 Parted Out 1993 Yellow/White #179 Sold 1990 Black/Gray #1361 Headers/4:10s Sold |
|
|
|
|
|
06-23-2014
|
#4 |
 Join Date: Feb 2011
Location: San Marcos CA
Posts: 1,802
|
Re: Repair for weather stripping?
I have used RTV and some plastic newspaper sleeves coated in mold release/non-stick cooking spray. Simply close the door glass on it and let the rtv mold to the shape. The open air ones just smear it over and level it off with a rag etc.
The weather strip does have to be reasonably intact, but i have used this method to repair a slice on my C6- it came out so good you can't even tell where it is without looking closely. |
|
|
|
|
06-23-2014
|
#5 |
|
Join Date: Oct 2008
Location: Colleyville, TX
Posts: 272
|
Re: Repair for weather stripping?
Black weatherstrip adhesive is better. Wrap clear plastic wrap around it and tape it together. Used this on the corners of my rear hatch and it works well
Jim |
|
|
|
|
06-23-2014
|
#6 | |
Join Date: Nov 2007
Location: Squires (near Ava MO in the Mark Twain N'tl Forest) - Missouri
Posts: 6,493
|
Re: Repair for weather stripping?
Quote:
__________________
Good carz, good food, good friendz = the best of timez! 90 #1202 "FBI" top end ported & relieved Cam timing by "Pete the Greek" Sans secondaries Chip & dyno tuning by Haibeck Automotive SW headers, X-pipe, MF muffs Former Secretary, ZR-1 Net Registry |
|
|
|
|
|
06-24-2014
|
#7 |
|
Join Date: Apr 2007
Location: Lake Bluff, IL
Posts: 2,096
|
Re: Repair for weather stripping?
Thanks Guys. I will try the RTV or weather strip adhesive. Hopefully I will be able to make it look a little less raggedy.--Bob
__________________
2016 Long Beach Red Z06 #10281 "POPS Z" 1995 Polo Green #409 "WARP TEN"--Haibeck 350/510 package, 4.10s, Hurst, Stock Exhaust with QTP Cutouts --Sold but still running strong 1993 Quasar Blue #161 "HIL KING" --Sold but still running strong, now with more than 120,000 miles 1967 Marlboro Maroon/Saddle Corvette Coupe 300 hp/4-spd --Sold a long time ago ZR-1 Net Registry Founding Member #95 NCM Lifetime Member Favorite Quote--Attributed to Mickey Thompson: "Too Much Horsepower is Almost Enough" |
|
|
|
|
06-25-2014
|
#8 |
 
Join Date: Sep 2012
Location: Westminster, Md.
Posts: 436
|
Re: Repair for weather stripping?
I have used 3 M strip caulk ( Black) on some of my older Vets.
Nelson007
__________________
WAZOO MEMBER 1993 #124 Ruby 1994 #??? Red/Black 1995 #061 Black/Red 2012 ZR1 Preproduction |
|
|
|
|
06-26-2014
|
#9 |
Join Date: Dec 2007
Location: Fremont,Ca
Posts: 3,079
|
Re: Repair for weather stripping?
Ive used black urethane but the area has to be completely silicone free.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
